Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0102
Holden Commodore VZ V6 Sedan 3in With Extractors Muffler
Holden Commodore VZ V6 Sedan 3in With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $3163.08 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0102
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Unlike the V8 ute packages it sits beside, the MPI Automotive MKHN0102 is built for the V6 Commodore: a 3in system listed to fit the Holden Commodore VZ V6 sedan, running extractors through to a twin-muffler rear.
Why a 3in system on the V6 VZ?
The MKHN0102 is sized at 3in, a single larger-bore path rather than a dual layout. On the VZ V6 sedan that gives the engine a freer route from the extractors back. The rear runs muffler-then-muffler, two silencing boxes in series, so the note stays restrained while the front of the system opens the engine up off the cast manifolds.
What do extractors change on a V6 Commodore?
Extractors replace the factory cast exhaust manifolds with tubular runners that merge more gently, letting the V6 breathe more freely than the original casting allowed. From there the gas runs the 3in pipe to the twin-muffler rear. We hold no flow or power figures for it and won't quote any; the honest claim is freer breathing off the manifold, nothing more specific than that.
Will it suit my VZ sedan?
It's listed to fit the Holden Commodore VZ V6 in sedan form. The supplier publishes no model year against it, so we treat fitment as listed-to-fit and confirm your exact VZ build, engine and rear arrangement, before placing the order.
Is it road legal, and what's the fitting like?
Cat retention isn't published in this listing, so we assess NSW emissions compliance for your specific car rather than assume it. Oak Flats Muffler Men fits these systems in-house across the Illawarra. The listed RRP is 3163.08 AUD, with fitting labour quoted once the sedan is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this system for the V6 or the V8 Commodore?
- The V6, the MKHN0102 is listed to fit the VZ V6 sedan specifically. The V8 utes use different part numbers.
- Why is it a single 3in pipe rather than dual?
- It's listed as a 3in system, one larger-bore path from the extractors back to the twin-muffler rear. We confirm the full layout against your car before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.