Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0112
Holden Commodore VT 5L Sedan 2.5in Dual With Extractors Muffler
Holden Commodore VT 5L Sedan 2.5in Dual With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4133.31 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0112
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0112 is a 2.5in dual extractor and exhaust package listed to fit the 5L Holden Commodore VT sedan, finished with two mufflers.
What's in this 2.5in twin-muffler kit?
This is a 2.5in dual system built around tubular extractors and finished with two mufflers. It covers the run from the 5L V8's heads to the rear, sitting at the smaller bore in MPI's VT 5L listings. The twin-muffler layout is the quieter of the options against the hotdog version at the same diameter.
What does an extractor do and what's the catch?
Extractors replace the cast factory manifolds with tubular primaries so each cylinder vents through its own pipe before merging. The honest catches are extra install labour, more under-bonnet heat and lower ground clearance than stock. The headers alone don't tell the whole story — the 2.5in dual pipework and the two mufflers shape the result, which is why MPI supplies them as one matched package.
Will it suit my VT 5L sedan?
It's listed to fit the 5L VT Commodore sedan. The workshop will confirm your exact engine and chassis before ordering, since one listing can't cover every detail across the VT range, and many of these cars carry earlier changes from previous owners.
What does fitting involve in the Illawarra?
Oak Flats Muffler Men installs these extractor systems on-site. We verify the two mufflers and 2.5in dual pipework clear the floor and rear, check the listed fitment against your car, and book the bay once the fit is confirmed.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How does the MKHN0112 differ from the hotdog version?
- This uses two mufflers; MPI's MKHN0113 runs a hotdog and one muffler at the same 2.5in bore for the VT 5L sedan.
- Will it fit my VT Commodore?
- It's listed to fit the 5L VT sedan. Confirm your exact variant with the workshop first.
- Is this a complete system?
- Yes — extractors, 2.5in dual pipework and two mufflers together.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.