Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0113
Holden Commodore VT 5L Sedan 2.5in Dual With Extractors Hotdog/Muffler
Holden Commodore VT 5L Sedan 2.5in Dual With Extractors Hotdog/Muffler (SKU: MKHN0113) Engineered.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4051.77 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0113
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Running a dual 2.5in layout with a hotdog resonator, the MPI Automotive MKHN0113 is an extractor system listed to fit the Holden Commodore VT 5L Sedan. The dual-2.5in design and the hotdog are what set this one apart — two banks each running their own 2.5in pipe.
What does the dual 2.5in layout do?
A dual setup gives the VT's 5L V8 a pipe for each bank rather than collecting both sides into one, and the MKHN0113 carries that as twin 2.5in runs back from the extractors. The hotdog — a compact straight-through resonator — sits in the run to take the edge off the note before the muffler. Together that is the character of this part: paired pipes, a resonator, and a muffler to finish.
Where do the extractors come in?
Extractors replace the VT's cast manifolds with tubular runners off each cylinder, feeding the dual 2.5in system behind them. On a V8 that means a header set per bank, each merging into its own 2.5in pipe. It is the breathing change at the head, and on this part it leads into the resonated dual layout rather than a single collector.
Will it suit my VT Commodore 5L?
The MKHN0113 is listed to fit the Holden Commodore VT 5L Sedan; confirm the exact build with the workshop first. The 2.5in figure sets the pipe size for both banks, the hotdog is part of the run, and material is not published by the supplier, so we confirm construction on order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits dual extractor systems like the MKHN0113 in-house across the Illawarra. The work means dropping both factory manifolds, fresh gaskets, and routing two 2.5in pipes plus the hotdog and muffler under the Sedan. Supplied by MPI Automotive at $4,051.77 AUD; send your details and we will confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What makes the MKHN0113 different?
- It runs a dual 2.5in layout with a hotdog resonator — twin pipes off the extractors, resonated before the muffler — for the VT 5L Sedan.
- Does it fit my Holden VT Commodore?
- It is listed to fit the Holden Commodore VT 5L Sedan. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.