Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0119
Holden Commodore VT 5L Sedan 3in Dual With Extractors Hotdog/Muffler
Holden Commodore VT 5L Sedan 3in Dual With Extractors Hotdog/Muffler (MKHN0119) Fits HOLDEN. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4366.48 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0119
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
This is the 3in dual build for the VT V8: the MPI Automotive MKHN0119 pairs two 3in pipes with a hotdog resonator, listed to fit the Holden Commodore VT 5L Sedan. The larger 3in bore across both banks is the defining feature here.
What does the 3in dual setup suit?
Twin 3in pipes give the VT's 5L V8 a generous exhaust path — one larger-bore run per bank rather than a single collector — making this the size to choose when you want the dual system sized for breathing. The MKHN0119 carries 3in from the extractors back, with a hotdog resonator in the run to settle the note ahead of the muffler. Bore is an application choice, and 3in is the larger end of this VT family.
How do the extractors feed it?
Extractors swap the VT's cast manifolds for tubular runners off each cylinder, a header set per bank, each merging into its own 3in pipe. That tube-and-merge layout clears gas more cleanly than the cast castings and on this part leads straight into the resonated 3in dual run. It is the engine-breathing change working as part of the complete exhaust.
Will it suit my VT Commodore 5L?
The MKHN0119 is listed to fit the Holden Commodore VT 5L Sedan; confirm the exact build with the workshop before ordering. The 3in figure sets the pipe size for both banks, the hotdog is part of the run, and material is not published by the supplier, so construction is confirmed on order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 3in dual extractor systems like the MKHN0119 in-house across the Illawarra. The job means dropping both factory manifolds, fresh gaskets, and routing two 3in pipes with the hotdog and muffler under the Sedan floor. Supplied by MPI Automotive at $4,366.48 AUD; send your details and we will confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What bore is the MKHN0119?
- It is a dual 3in system with a hotdog resonator — the larger-bore twin-pipe option for the VT 5L Sedan.
- Does it fit my Holden VT Commodore?
- It is listed to fit the Holden Commodore VT 5L Sedan. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.