Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0122
Holden Commodore VT - VZ V8 Sedan 3in Single With Extractors Muffler
Holden Commodore VT - VZ V8 Sedan 3in Single With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $3771.70 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0122
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0122 is a 3in extractor-and-pipe system listed to fit the Holden Commodore VT–VZ V8 Sedan — tuned-length extractors off the heads through to twin mufflers, supplied as a complete kit rather than a single muffler swap.
What does this system cover?
This is the full extractor-back run for the Holden Commodore VT–VZ V8 Sedan: tuned-length extractors that bolt to the heads, then the connecting pipes and the rear section, which runs a muffler on each side. The pipework is listed at 3in. It is a single (rather than dual) sedan system.
What are extractors and what do they change?
Extractors (also called headers) replace the cast factory manifolds with tuned-length tubes — one primary per cylinder — that merge downstream, letting each cylinder breathe out with less back-pressure than the restrictive factory casting. That is the usual reason owners of these V8s fit them. The trade-off is real: they change the exhaust note and, depending on the merge and the factory emissions hardware, can affect how the car presents at inspection. Matching the 3in pipework to the rear keeps the result usable on the street.
Will it suit my Holden?
It is listed to fit the Holden Commodore VT–VZ V8 Sedan; confirm the exact build before ordering. Feed data on parts like this can be imperfect, and the VT through VZ Commodore ran across several body styles and drivelines. This is the sedan fitment. Give us your build details and Oak Flats Muffler Men, here in the Illawarra, will match them against the listing before anything is ordered.
Is it road legal in NSW?
Extractors touch the part of the system the regulator looks at, so road legality depends on your specific car and how it presents at inspection in NSW — we cannot promise a blanket pass. The supplier does not publish a compliance approval for this listing and we will not claim one. Bring the car in and we will talk through what fitting extractors means for your registration before anything is cut or bolted up.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKHN0122 fit my Commodore VT–VZ V8 Sedan?
- It is listed to fit the Holden Commodore VT–VZ V8 Sedan. These ran in several variants, so confirm your exact build with the workshop before ordering.
- What size is this system and what is at the back?
- It is listed at 3in and runs a muffler on each side. It is a complete extractor-back kit, not just a muffler.
- Can you fit it for me?
- Yes. We supply and fit MPI Automotive systems in-house. Send your build and we will confirm the fitment and book the bay.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.