Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0126
Holden Commodore VT - VZ V8 Sedan 2.5in Dual With Extractors Muffler/Tailpipe
Holden Commodore VT - VZ V8 Sedan 2.5in Dual With Extractors Muffler/Tailpipe (SKU: MKHN0126) Engineered
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4040.93 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0126
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Listed across the VT-to-VZ V8 Sedans, the MPI Automotive MKHN0126 is a dual 2.5in extractor system finished with a muffler. Its breadth of fitment — the whole VT-VZ V8 Sedan span — and a clean dual-into-muffler layout are what define it.
What does this part cover across VT-VZ?
The MKHN0126 is listed for the Holden Commodore V8 Sedan from VT through to VZ, so it suits a run of model years off a single part. It carries a dual 2.5in layout — a pipe for each bank — straight into a muffler, without a separate resonator in the run. That breadth of fitment is the first thing to confirm: the exact series and build decide how the rear sits.
What do the extractors change?
Extractors replace the cast factory manifolds with tubular runners off each cylinder, a header set per bank on the V8. The MKHN0126 feeds those into twin 2.5in pipes and a muffler, giving the spent gas a cleaner exit than the heavy cast castings. It is the breathing change at the head, working as part of the full exhaust rather than on its own.
Will it suit my VT-VZ Commodore V8?
It is listed to fit the Holden Commodore V8 Sedan across VT to VZ; tell us your series and we will confirm the exact build first. The 2.5in figure sets the pipe size for both banks, and material is not published by the supplier, so the workshop confirms construction on order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits dual extractor systems like the MKHN0126 in-house across the Illawarra. The work means dropping both factory manifolds, fresh gaskets, and routing two 2.5in pipes into the muffler under the Sedan. Supplied by MPI Automotive at $4,040.93 AUD; send your details and we will confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which models does the MKHN0126 fit?
- It is listed across the Holden Commodore V8 Sedan from VT through to VZ. Confirm your exact series with the workshop before ordering.
- Does it use a hotdog?
- No — this build runs dual 2.5in pipes straight into a muffler, without a separate hotdog resonator.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.