Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0135
VY VZ V8 HSV Sedan 3in Dual With Extractors Muffler
VY VZ V8 HSV Sedan 3in Dual With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4549.91 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0135
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Listed to fit the VY VZ V8 HSV Sedan, the MPI Automotive MKHN0135 is a 3in extractor system — headers off the heads through to twin mufflers, supplied as a whole kit.
What does this system cover?
This is the full extractor-back run for the VY VZ V8 HSV Sedan: tuned-length headers that bolt to the heads, then the connecting pipework and the rear section, finishing in a muffler on each side at the rear. The pipework is listed at 3in. It runs a dual layout.
What are extractors and what do they change?
Extractors are a tuned-length tubular manifold that takes the place of the restrictive factory castings. By giving each cylinder a clean run before the tubes merge, they reduce exhaust back-pressure — the change owners of these engines are usually chasing. The honest caveats: they are time-consuming to fit, they make the car louder than stock, and because they are part of the section examined at inspection, road registration depends on how your particular car presents.
Will it suit my Holden/HSV?
It is listed to fit the VY VZ V8 HSV Sedan; confirm the exact build before ordering. This is the sedan fitment. Parts feeds occasionally drift, and this family of cars covered several specs, so the fitment here is indicative until matched to your actual vehicle. Give us your build details and Oak Flats Muffler Men, here in the Illawarra, will match them against the listing before anything is ordered.
Is it road legal in NSW?
Fitting headers changes the emissions-relevant front of the exhaust, so NSW road legality depends on your car and how it presents at inspection. There is no published compliance approval on this MPI Automotive listing, and we will not assert one — we will discuss it with you first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKHN0135 fit my VY VZ V8 HSV Sedan?
- It is listed to fit the VY VZ V8 HSV Sedan. These ran in several variants, so confirm your exact build with the workshop before ordering.
- What diameter is it and what's the rear setup?
- Pipe size is listed at 3in, with twin mufflers at the back. The kit is the whole extractor-back run, not a single component.
- Can the workshop install it for me?
- Yes, in-house. We supply and fit these MPI Automotive kits; pass us your details and we will verify the fitment and book you in.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.