Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0177
HSV VE E2 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler
HSV VE E2 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4812.60 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0177
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
MPI Automotive's MKHN0177 is a 3in extractor-back system listed to fit the HSV VE E2 Sedan Wagon with 1 7/8in primaries, running headers from the heads through to a hotdog resonator and rear muffler. It is a full kit, not a back-box change.
What does this system cover?
This is the full extractor-back run for the HSV VE E2 Sedan Wagon: tuned-length headers that bolt to the heads, then the connecting pipework and the rear section, finishing in a hotdog resonator into a rear muffler. The pipework is listed at 3in. The extractor primaries are listed at 1 7/8in.
What are extractors and what do they change?
An extractor set replaces the factory cast manifolds with equal-ish length tubes that each carry one cylinder's pulse before merging. Less restriction off the heads is the goal, and on an older performance car that is where owners chase a freer-breathing result and a fuller note. It is not a free lunch: headers are fiddly to fit around steering and chassis, they alter how the car sounds, and they sit in the part of the system the regulator cares about — so legality is a per-car question, not a blanket one.
Will it suit my Holden/HSV?
It is listed to fit the HSV VE E2 Sedan Wagon; confirm the exact build before ordering. This is the sedan fitment. Listing data is not infallible and these models ran across a few variants, so treat the fitment as listed-to-fit rather than confirmed for your exact car. Give us your build details and Oak Flats Muffler Men, here in the Illawarra, will match them against the listing before anything is ordered.
Is it road legal in NSW?
Because extractors replace emissions-relevant hardware at the front of the system, whether the result is acceptable for road registration in NSW depends on the individual vehicle and inspection. No blanket compliance is published for this part by MPI Automotive, and we will not claim one — talk it through before committing.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKHN0177 fit my HSV VE E2 Sedan Wagon?
- It is listed to fit the HSV VE E2 Sedan Wagon. These ran in several variants, so confirm your exact build with the workshop before ordering.
- What diameter is it and what's the rear setup?
- Pipe size is listed at 3in, with a hotdog resonator and rear muffler at the back. The kit is the whole extractor-back run, not a single component.
- Can the workshop install it for me?
- Yes, in-house. We supply and fit these MPI Automotive kits; pass us your details and we will verify the fitment and book you in.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.