Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0185
HSV VE E3 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler
MPI Automotive HSV VE E3 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4812.60 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0185
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0185 is a 3in extractor system listed to fit the HSV VE E3 Sedan Wagon with 1 7/8in primaries — tuned-length headers off the heads through to a hotdog resonator and rear muffler, supplied as a complete kit rather than a single muffler swap.
What does this system include?
From the heads rearward, this system fits the HSV VE E3 Sedan Wagon with tuned-length extractors, connecting pipes, and a back end built around a hotdog resonator into a rear muffler. The listed diameter is 3in. The extractor primaries are listed at 1 7/8in.
Why fit extractors instead of keeping the cast manifolds?
Extractors — also called headers — swap the cast factory exhaust manifolds for tuned-length steel tubes, one primary per cylinder, that merge a short way downstream. The idea is to let each cylinder scavenge its spent gases with less of the back-pressure a restrictive factory casting imposes, which is the usual reason owners of these engines go looking for them. The trade-offs are honest ones: the note changes, fitting is labour-heavy because the manifolds sit deep in the engine bay, and because extractors are part of the section a NSW inspection looks at, road presentation depends on the individual car.
Is this the right kit for my Holden/HSV?
The HSV VE E3 Sedan Wagon is the listed fitment; we still want your specific build confirmed. This is the sedan fitment. Feed data on parts like this can be imperfect, and these ranges spanned several body styles and drivelines, so the listed fitment is the starting point, not a guarantee. Pass us the details and Oak Flats Muffler Men in the Illawarra will verify the match before anything is ordered.
Will it pass inspection in NSW?
Extractors sit in the part of the system a NSW inspection examines, so road legality comes down to your specific car and how it presents. MPI Automotive does not publish a compliance approval for this listing and we will not invent one. Talk it through with us and we will walk through what fitting extractors means for your registration before anything is cut.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKHN0185 listed for the HSV VE E3 Sedan Wagon?
- It is the listed fitment for the HSV VE E3 Sedan Wagon. Confirm your specific variant with the workshop before placing an order.
- What size is this system and what is at the back?
- It is listed at 3in and runs a hotdog resonator and rear muffler. It is a complete extractor-back kit, not just a muffler.
- Do you fit these in-house?
- We do — MPI Automotive systems are supplied and fitted in-house at our Illawarra workshop. Give us your build and we will confirm fit and schedule it.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.