Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0188
Holden Commodore VE Ute & Maloo 2.5in With Extractors Muffler
Holden Commodore VE Ute & Maloo 2.5in With Extractors Muffler/Muffler (MKHN0188) Fits HOLDEN. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4985.48 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0188
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Cut for the ute tray, the MPI Automotive MKHN0188 is a 2.5in extractor system listed to fit the Holden Commodore VE Ute and Maloo. It runs a twin-muffler layout, with the ute-specific rear routing as the detail that defines it.
Why does the ute body change the system?
A ute carries its exhaust differently to a sedan — the tray floor and chassis rails set where pipe and muffler can sit, so the rear of the MKHN0188 is routed for that shape. It is listed for the VE Ute and Maloo and carries 2.5in from the extractors through a twin-muffler run. The ute packaging and the double muffler are the character of this part.
What does the twin-muffler run do?
Rather than a single silencer, the MKHN0188 uses a muffler-muffler layout — two mufflers in the 2.5in run — for more silencing and a more settled note under the tray. The extractors ahead of them replace the factory cast manifolds with tubular runners off each cylinder, a header set per bank, easing the way the engine breathes out. It works as part of the complete exhaust, not on its own.
Will it suit my VE Ute or Maloo?
The MKHN0188 is listed to fit the Holden Commodore VE Ute and Maloo; confirm the exact build with the workshop before ordering. The 2.5in figure sets the pipe size, and material is not published by the supplier, so the workshop confirms construction on order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits ute extractor systems like the MKHN0188 in-house across the Illawarra. The job means dropping the factory manifolds, fresh gaskets, and routing the 2.5in run with both mufflers under the tray. Supplied by MPI Automotive at $4,985.48 AUD; send your details and we will confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the MKHN0188 fit the Maloo?
- It is listed to fit the Holden Commodore VE Ute and Maloo. Confirm your exact build with the workshop before ordering.
- How many mufflers does it use?
- Two — it runs a muffler-muffler layout in the 2.5in run for more silencing under the tray.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.