Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0189
Holden Commodore VE Ute & Maloo 2.5in With Extractors Hotdog/Muffler
Holden Commodore VE Ute & Maloo 2.5in With Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4844.40 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0189
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
For the VE Ute and Maloo, the MPI Automotive MKHN0189 pairs a hotdog resonator with a muffler on a 2.5in extractor run. The resonated hotdog-then-muffler layout, packaged for the ute tray, is what sets this one apart.
What does the hotdog do on a ute?
The hotdog is a compact straight-through resonator that sits ahead of the muffler, taking the rasp off the note without the bulk of a second box — useful under a ute tray where space is tighter. On the MKHN0189 it works a 2.5in run on the VE Ute and Maloo, with the muffler finishing behind it. That resonated single-muffler layout is the character of this part.
How is it cut for the ute body?
A ute routes its exhaust around the tray floor and chassis rails, so the rear of the MKHN0189 is shaped for that body rather than a sedan. The extractors at the head replace the factory cast manifolds with tubular runners off each cylinder, a header set per bank, feeding the 2.5in run. It is the breathing change working as part of the complete exhaust.
Will it suit my VE Ute or Maloo?
The MKHN0189 is listed to fit the Holden Commodore VE Ute and Maloo; confirm the exact build with the workshop first. The 2.5in figure sets the pipe size, the hotdog is part of the run, and material is not published by the supplier, so construction is confirmed on order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits ute extractor systems like the MKHN0189 in-house across the Illawarra. The work means dropping the factory manifolds, fresh gaskets, and routing the 2.5in run with the hotdog and muffler under the tray. Supplied by MPI Automotive at $4,844.40 AUD; send your details and we will confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What is the hotdog on the MKHN0189?
- It is a compact straight-through resonator in the 2.5in run, ahead of the muffler, to settle the note on the VE Ute and Maloo.
- Does it fit the Maloo?
- It is listed to fit the Holden Commodore VE Ute and Maloo. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.