Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0194
Holden Commodore VE Ute & Maloo V8 3in With 1 7/8 in Extractors Muffler
Holden Commodore VE Ute & Maloo V8 3in With 1 7/8 in Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5030.25 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0194
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MKHN0194 from MPI Automotive is a 3in extractor system for the Holden Commodore VE Ute and Maloo V8 with 1 7/8in primaries — a complete run from tuned-length headers through to twin mufflers, rather than a single-component swap.
What does this system cover?
This is the full extractor-back run for the Holden Commodore VE Ute and Maloo V8: tuned-length headers that bolt to the heads, then the connecting pipework and the rear section, finishing in a muffler on each side at the rear. The pipework is listed at 3in. The extractor primaries are listed at 1 7/8in.
What are extractors and what do they change?
Headers (extractors) are tubular replacements for the heavy cast manifolds the factory bolts to the heads. Each cylinder gets its own primary tube before the collector brings them together, cutting the back-pressure that a cast manifold builds in. That is the breathing benefit owners are after. Against it: the install is involved, the exhaust note grows, and since extractors touch the emissions-relevant front of the system, what passes inspection in NSW comes down to the specific build.
Will it suit my Holden?
It is listed to fit the Holden Commodore VE Ute and Maloo V8; confirm the exact build before ordering. This is the ute fitment. Catalogue data can carry small errors and these platforms came in more than one configuration, so the fit is what the supplier lists — we verify it against your build, not the other way around. Give us your build details and Oak Flats Muffler Men, here in the Illawarra, will match them against the listing before anything is ordered.
Is it road legal in NSW?
Road registration is a per-car question with extractors, since they touch the section the regulator looks at. MPI Automotive publishes no compliance statement for this listing and we won't pretend otherwise; we will go over the implications for your rego before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKHN0194 fit my Holden Commodore VE Ute and Maloo V8?
- It is listed to fit the Holden Commodore VE Ute and Maloo V8. These ran in several variants, so confirm your exact build with the workshop before ordering.
- What diameter is it and what's the rear setup?
- Pipe size is listed at 3in, with twin mufflers at the back. The kit is the whole extractor-back run, not a single component.
- Can the workshop install it for me?
- Yes, in-house. We supply and fit these MPI Automotive kits; pass us your details and we will verify the fitment and book you in.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.