Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0279
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Muffler
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2625.29 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0279
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Specified for the IRS automatic driveline, the MPI Automotive MKHN0279 is a 2.5in extractor system listed to fit the Holden VP, VR and VS Statesman V8. The independent rear suspension and auto combination drives the fitment here.
Why does the IRS auto spec matter?
Independent rear suspension and the automatic transmission both change what sits under the car — the rear subframe, the tunnel and the crossmember all set clearances the exhaust has to work around. The MKHN0279 is cut for the IRS auto VP-VR-VS Statesman V8, so its routing matches that driveline rather than a live-axle or manual car. That drivetrain-specific fitment is the first thing to confirm.
What do the extractors change?
Extractors replace the factory cast manifolds with tubular runners off each cylinder, a header set per bank on the V8, feeding the 2.5in system behind them. That tube-and-merge layout eases the way the engine breathes out compared with the cast castings, finishing through a muffler. It is the breathing change at the head, working as part of the complete exhaust.
Will it suit my VP-VS Statesman V8?
The MKHN0279 is listed to fit the Holden VP, VR and VS Statesman V8 with IRS and automatic; confirm your exact driveline with the workshop before ordering, since the IRS and auto define the fit. The 2.5in figure sets the pipe size, and material is not published by the supplier, so construction is confirmed on order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Statesman extractor systems like the MKHN0279 in-house across the Illawarra. The job means dropping the factory manifolds, fresh gaskets, and clearing the IRS subframe and auto crossmember as the 2.5in run is routed back. Supplied by MPI Automotive at $2,625.29 AUD; send your details and we will confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKHN0279 specific to IRS autos?
- Yes — it is listed for the Holden VP-VR-VS Statesman V8 with independent rear suspension and automatic. Confirm your driveline with the workshop before ordering.
- What bore is it?
- It is a 2.5in system finished with a muffler.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.