Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0280
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Tailpipe
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2497.72 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0280
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0280 is the tailpipe-finished package for the IRS automatic VP-VR-VS Statesman V8 — 2.5in extractors and pipework run back to a tailpipe, no muffler specified in the listing. It's the open-silencing option for the auto IRS car.
What does the tailpipe-only finish leave open?
The MKHN0280 is listed with a tailpipe rather than a muffler in its configuration, so it's the extractors and 2.5in run carried back to the tailpipe with silencing decided at fitting. That suits an owner who already has a muffler to keep, or who wants the workshop to choose one for the automatic IRS Statesman — the back-half note stays in your hands.
Why the auto IRS routing matters
The automatic transmission crossmember and the independent rear cradle on the VP-VR-VS Statesman both sit where the exhaust routes, so the auto IRS car can need different clearance to a manual or live-axle build. The MKHN0280 is set for that auto IRS V8 — confirm your transmission and rear end with the workshop before ordering.
Extractors on a V8 Statesman — the honest picture
Extractors replace the cast factory manifold with tubular headers, giving each cylinder its own primary before they merge for a freer exit off the heads. The trade is extra fitting time, more under-bonnet heat and tighter clearance than the original casting. The 2.5in pipework and tailpipe carry it back from there.
Fitment and fitting at our Illawarra workshop
It's listed to fit the V8 IRS automatic VP-VR-VS Statesman. Oak Flats Muffler Men supplies and fits these systems across the Illawarra — we confirm the auto crossmember and IRS clearance, the 2.5in routing and the tailpipe position, talk through any silencing you want, and check the listed fitment before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the MKHN0280 include a muffler?
- No — the listing specifies a tailpipe finish. We can add silencing at fitting if you want it.
- Is it for the automatic IRS Statesman?
- Yes — it's listed for the V8 IRS auto VP-VR-VS Statesman. Confirm your transmission and rear end with the workshop.
- What diameter does it run?
- It's the 2.5in version, run back to a tailpipe.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.