Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0281
Holden VP VR VS Statesman V8 IRS Auto 3in With Extractors Muffler
Holden VP VR VS Statesman V8 IRS Auto 3in With Extractors Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2764.78 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0281
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0281 is a 3in extractor-back exhaust package listed to fit the Holden VP, VR and VS Statesman V8 with IRS and auto. It runs tuned extractors into a 3in system with a muffler, so it's the full engine-back replacement with a rear silencer fitted.
What does this MKHN0281 package cover?
This package starts at the cylinder heads with tubular extractors and carries a 3in system back through a muffler. On the IRS Statesman V8 that's the complete exhaust path from the engine rearward, with the muffler in place to keep the note in check rather than running straight through to a tailpipe. The 3in diameter is the larger bore MPI lists for this car.
What are extractors and a muffler doing in this system?
Extractors replace the cast factory manifolds with tubular runners that merge downstream, generally easing back-pressure and changing how a V8 breathes and sounds. The muffler at the rear is the silencing stage — it tempers the volume the bigger-bore pipework would otherwise let through. Pairing extractors with a muffler is the more street-civil end of the range compared with a tailpipe-only finish, which is the trade-off this configuration leans toward.
Will it suit my VP, VR or VS Statesman?
It's listed to fit the Holden VP, VR and VS Statesman V8 with independent rear suspension and automatic transmission. That IRS-and-auto detail is part of the listing, so a live-axle or manual car may need a different part number. Confirm the exact build with the workshop before ordering, as these Holdens vary by driveline.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor-and-muffler systems like this in-house across the Illawarra. We check extractor clearances and steering, fit fresh head gaskets and confirm the IRS-auto fitment against your car before booking the install.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKHN0281 fit my Statesman?
- It's listed to fit the Holden VP, VR and VS Statesman V8 with IRS and auto. Confirm your driveline with the workshop before ordering.
- Does this one have a muffler?
- Yes — this 3in extractor-back package is configured with a muffler, unlike the tailpipe-finished version.
- Is it a complete system?
- It runs from the extractors at the heads through the 3in pipework to the muffler — the full engine-back replacement.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.