Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0285SC
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Muffler
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $3076.04 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0285SC
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0285SC is the automatic-transmission version of the IRS VP-VR-VS Statesman V8 extractor package — 2.5in pipework finished with a muffler, routed for the auto driveline. The automatic gearbox is the fitment distinction that separates it from the manual-applicable listing.
Why does the automatic get its own part?
On the VP-VR-VS Statesman, the automatic transmission and its crossmember sit where the exhaust has to route, so an auto car can need different bends and clearance to a manual. The MKHN0285SC is listed for the IRS V8 with the automatic, so the 2.5in run and hanger points are set for that driveline. Confirm your transmission with the workshop, since the gearbox decides which package fits.
What does the included muffler set?
This package finishes with a muffler, so the back-half note is part of the kit rather than a separate call at fitting. For an IRS auto Statesman owner that means a complete extractors-to-muffler run with the silencing already specified — the extractor gain with a settled cruise out of the box.
Extractors and the honest trade-offs
Extractors replace the cast factory manifold with tubular headers, each cylinder running its own primary before they merge for a freer exit off the heads. The trade on a V8 Statesman is extra fitting time, more under-bonnet heat and tighter clearance than the original casting. The 2.5in pipework and muffler are matched to them as one package.
Fitment and fitting at our Illawarra workshop
It's listed to fit the V8 IRS automatic VP-VR-VS Statesman. Oak Flats Muffler Men supplies and fits these systems across the Illawarra — we confirm the auto crossmember and IRS clearance, the 2.5in routing and the muffler position, and check the listed fitment before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKHN0285SC for an automatic Statesman?
- Yes — it's listed for the IRS V8 VP-VR-VS Statesman with the automatic transmission. Confirm your gearbox with the workshop.
- Does it include a muffler?
- Yes — the 2.5in run is finished with a muffler.
- Will it fit my IRS car?
- It's listed for the IRS auto V8 Statesman. We confirm the exact build before fitting.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.