Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0286SC
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Tailpipe
Holden VP VR VS Statesman V8 IRS Auto 2.5in With Extractors Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2963.47 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0286SC
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0286SC is a 2.5in extractor-back exhaust package listed to fit the Holden VP, VR and VS Statesman V8 with IRS and auto. It pairs tuned extractors with a 2.5in system finished in a tailpipe, so it replaces the manifold-to-tip run rather than just the rear section.
What does this MKHN0286SC package cover?
This is an extractor-based system, which means it starts at the cylinder heads with tubular extractors in place of the cast factory manifolds, then carries a 2.5in system back to a tailpipe finish. On the IRS Statesman V8 that's the whole exhaust path from the engine rearward. The 2.5in diameter is the smaller of the two bore options MPI lists for this car, which suits a street-focused build over an outright race setup.
What are extractors and what do they change?
Extractors (also called headers) swap the restrictive cast-iron exhaust manifolds for separate tubular runners, one per cylinder, that merge further downstream. The idea is to let each cylinder's exhaust pulse escape with less back-pressure and less interference from its neighbours, which generally helps a V8 breathe and changes the exhaust note. The trade-off is that extractors run hotter and closer to surrounding components, so fit and clearance matter — which is exactly why they're worth fitting properly rather than guessing.
Will it suit my VP, VR or VS Statesman?
It's listed to fit the Holden VP, VR and VS Statesman V8 with independent rear suspension and automatic transmission — that IRS-and-auto combination is part of the listing, so a live-axle or manual car may need a different part number. Confirm your exact build with the workshop before ordering, since these older Holdens vary by driveline and subframe.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like this in-house across the Illawarra. Extractor installs involve heat-shield and steering clearance checks and fresh gaskets at the head, so we confirm the IRS-auto fitment and book the bay once we've matched it to your car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKHN0286SC fit my Statesman?
- It's listed to fit the Holden VP, VR and VS Statesman V8 with IRS and auto. Confirm your exact driveline with the workshop before ordering.
- What size is this system?
- It's a 2.5in system running from the extractors back to a tailpipe.
- Is it just a rear muffler, or the whole exhaust?
- It's an extractor-back package — extractors at the heads plus the 2.5in pipework back to the tailpipe, not a tailpipe-only change.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.