Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0289
Holden WH Statesman V8 2.5in Dual With Extractors Muffler
Holden WH Statesman V8 2.5in Dual With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4172.49 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0289
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0289 is a 2.5in extractor and exhaust package listed to fit the Holden WH Statesman V8. It runs 2.5in system pipework off the extractors and finishes with twin mufflers, replacing the cast factory manifolds and the pipework behind them.
What does this extractor package cover?
Extractors, also called headers, swap the cast factory exhaust manifolds for separate tubular runners off each cylinder, then feed into the rest of the system. The MKHN0289 is a full run rather than the headers alone: the listed primaries step into 2.5in pipework and finish with twin mufflers. It is a change to the exhaust side of the engine — how the spent gas leaves — not an internal engine part, and it does its work as part of the wider system on this long-wheelbase Holden.
What do the size and muffler setup change?
This build runs twin mufflers, which keeps the note more subdued than a hotdog-and-muffler or single-muffler setup on the same car. The system is 2.5in off the listed primaries, so the bore the rest of the exhaust mates to is set at 2.5in. The aim is to let the engine breathe out past the cast manifolds while keeping volume measured — the quieter end of the range for this platform.
Will it suit my Holden WH Statesman V8?
The MKHN0289 is listed to fit the Holden WH Statesman V8. Treat that as "listed to fit", not a guarantee: extractors are a significant fitment and need to match the specific platform, body and engine. Confirm your exact build with the workshop before ordering, since series, cab and driveline details decide whether this set drops in cleanly.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor packages like the MKHN0289 in-house across the Illawarra. The job means good access to drop the cast manifolds off the heads, fresh gaskets, and matching the 2.5in pipework and twin mufflers back along the car. Supplied by MPI Automotive at $4,172.49 AUD; this is a made-to-order set, so send us your Holden WH Statesman V8's build details and we'll confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the MKHN0289 fit?
- It's listed to fit the Holden WH Statesman V8. Confirm your exact series and engine with the workshop before ordering.
- What size is the system?
- It runs 2.5in pipework off the extractors and finishes with twin mufflers.
- Is it supplied and fitted here?
- Yes — Oak Flats Muffler Men supplies the MPI MKHN0289 and fits it in-house across the Illawarra.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.