Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0290
Holden WH Statesman V8 2.5in Dual With Extractors Hotdog/Muffler
Holden WH Statesman V8 2.5in Dual With Extractors Hotdog/Muffler (SKU: MKHN0290) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4094.57 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0290
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
For the WH Statesman, the MPI Automotive MKHN0290 runs a dual 2.5in layout with a hotdog resonator. Listed to fit the Holden WH Statesman V8, it carries twin 2.5in pipes — one per bank — through the hotdog and into the muffler.
What does the dual 2.5in setup do?
A dual layout gives the WH's V8 a pipe for each bank rather than collecting both sides into one, and the MKHN0290 carries that as twin 2.5in runs from the extractors back. A hotdog — a compact straight-through resonator — sits in the run to take the edge off the note ahead of the muffler. Paired pipes, a resonator and a muffler are the character of this WH Statesman part.
Where do the extractors come in?
Extractors replace the WH's cast factory manifolds with tubular runners off each cylinder, a header set per bank on the V8, each merging into its own 2.5in pipe. That tube-and-merge layout clears gas more cleanly than the cast castings and on this part feeds the resonated dual run. It is the breathing change at the head, working as part of the complete exhaust.
Will it suit my WH Statesman V8?
The MKHN0290 is listed to fit the Holden WH Statesman V8; confirm the exact build with the workshop before ordering. The 2.5in figure sets the pipe size for both banks, the hotdog is part of the run, and material is not published by the supplier, so construction is confirmed on order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits dual extractor systems like the MKHN0290 in-house across the Illawarra. The job means dropping both factory manifolds, fresh gaskets, and routing two 2.5in pipes with the hotdog and muffler under the WH. Supplied by MPI Automotive at $4,094.57 AUD; send your details and we will confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What makes the MKHN0290 different?
- It is a dual 2.5in system with a hotdog resonator — twin pipes off the extractors, resonated before the muffler — for the WH Statesman V8.
- Does it fit my WH Statesman?
- It is listed to fit the Holden WH Statesman V8. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.