Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0291
Holden WH Statesman V8 2.5in Dual With Extractors Muffler/Tailpipe
Holden WH Statesman V8 2.5in Dual With Extractors Muffler/Tailpipe (SKU: MKHN0291) Engineered.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $3998.37 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0291
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0291 is a 2.5in extractor and exhaust package listed to fit the Holden WH Statesman V8. It teams tubular extractors with 2.5in system pipework run as a dual setup and finishes with a muffler and tailpipe, swapping out the cast factory manifolds and the gear behind them.
What does this extractor package cover?
Extractors, also called headers, replace the cast factory exhaust manifolds with separate tubular runners off each cylinder, then feed into the rest of the system. The MKHN0291 is a full run rather than the headers on their own: tubular extractor primaries step into 2.5in pipework, split as a dual layout, and end in a muffler and tailpipe. It changes the exhaust side of the engine — how spent gas leaves the heads — not anything inside the engine.
What do the size and end setup change?
Sized at 2.5in, the 2.5in bore sets the diameter the rest of the exhaust mates to behind the extractors, and this one finishes with a muffler and tailpipe. The aim is to let a V8 like this breathe out with less restriction than the cramped cast factory manifolds, while the muffler arrangement keeps the note in check.
Will it suit my Holden WH Statesman V8?
The MKHN0291 is listed to fit the Holden WH Statesman V8. Read that as "listed to fit", not a guarantee: extractors are a significant fitment and have to match the specific platform, body and engine. Confirm your exact build with the workshop before ordering, since series, body style and driveline details decide whether this set drops in cleanly.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor packages like the MKHN0291 in-house across the Illawarra. The job means good access to drop the cast manifolds off the heads, fresh gaskets, and matching the 2.5in pipework and dual run back along the car. Supplied by MPI Automotive at $3,998.37 AUD; this is a made-to-order set, so send us your Holden WH Statesman V8's details and we'll confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the MKHN0291 fit?
- It's listed to fit the Holden WH Statesman V8. Confirm your exact series and engine with the workshop before ordering.
- What pipework size is this?
- 2.5in system pipework off the extractors, finishing with a muffler and tailpipe.
- Is it supplied and fitted here?
- Yes — Oak Flats Muffler Men supplies the MPI MKHN0291 and fits it in-house across the Illawarra.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.