Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0301
Holden WK WL S/MAN V8 2.5in Dual With Extractors Muffler/Tailpipe
MPI Automotive Holden WK WL S/MAN V8 2.5in Dual With Extractors Muffler/Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4073.83 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0301
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0301 is a 2.5in dual extractor package for the WK and WL Statesman V8, finished with a muffler and tailpipe. The twin 2.5in routing is the defining feature — two pipes back rather than a single run, sized for street response.
What does a 2.5in dual layout mean here?
Dual means two separate 2.5in pipes carried back from the extractors rather than one. On a long-wheelbase WK/WL Statesman V8 that's the symmetric, full-width back half, with each side keeping gas speed up at the 2.5in bore for low-down and mid-range response. The package finishes with a muffler and a tailpipe, so it's a complete extractors-back run for the car.
How does the Statesman wheelbase affect fitment?
The WK and WL Statesman sit on the long-wheelbase platform, so the exhaust has more length to route than a standard sedan and the hanger points differ. The MKHN0301 is listed for that body and the V8, with the dual routing set to suit it — confirm your exact Statesman build before ordering, as these have been modified over the years.
What do the extractors do, honestly?
Extractors replace the cast factory manifold with tubular headers, each cylinder running its own primary before they merge for a cleaner exit off the heads. The trade on a V8 Statesman is extra fitting time, more under-bonnet heat and tighter clearance than the original casting. The 2.5in dual pipework, muffler and tailpipe are supplied as one matched package.
Fitting at our Illawarra workshop
Oak Flats Muffler Men supplies and fits these systems across the Illawarra. We confirm the dual 2.5in routing, the muffler and tailpipe positions and the listed fitment against your actual WK or WL Statesman before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKHN0301 a single or dual system?
- It's a 2.5in dual layout — two pipes back from the extractors, finished with a muffler and tailpipe.
- Which Statesman does it fit?
- It's listed for the WK and WL Statesman V8. Confirm your exact build with the workshop first.
- Does it include a tailpipe?
- Yes — the package finishes with a muffler and a tailpipe.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.