Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0306
Holden WK WL Statesman V8 3in Dual With 1 7/8 in Extractors Hotdog/Muffler
Holden WK WL Statesman V8 3in Dual With 1 7/8 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4836.82 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0306
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0306 is a 3in extractor and exhaust package listed to fit the Holden WK/WL Statesman V8. It pairs 1-7/8in tubular extractors with 3in system pipework and a hotdog resonator and a rear muffler, replacing the cast factory manifolds and the gear behind them.
What does this extractor package cover?
Extractors, also called headers, swap the cast factory exhaust manifolds for separate tubular runners off each cylinder, then feed into the rest of the system. The MKHN0306 is a full run rather than the headers alone: 1-7/8in primaries step into 3in pipework and finish with a hotdog resonator and a rear muffler. It is a change to the exhaust side of the engine — how the spent gas leaves — not an internal engine part, and it does its work as part of the wider system on this long-wheelbase Holden.
What do the size and muffler setup change?
The tail side here uses a hotdog resonator and a rear muffler. A hotdog is a compact straight-through resonator that takes some edge off the note without the volume of a full muffler box; behind it the rear muffler does the main silencing. Sized at 3in, with 1-7/8in primaries off the heads, the MKHN0306 aims to free up flow past the cast manifolds while keeping the note civil, not raucous.
Will it suit my Holden WK/WL Statesman V8?
The MKHN0306 is listed to fit the Holden WK/WL Statesman V8. Treat that as "listed to fit", not a guarantee: extractors are a significant fitment and need to match the specific platform, body and engine. Confirm your exact build with the workshop before ordering, since series, cab and driveline details decide whether this set drops in cleanly.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor packages like the MKHN0306 in-house across the Illawarra. The job means good access to drop the cast manifolds off the heads, fresh gaskets, and matching the 3in pipework and hotdog resonator and rear muffler back along the car. Supplied by MPI Automotive at $4,836.82 AUD; this is a made-to-order set, so send us your Holden WK/WL Statesman V8's build details and we'll confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the MKHN0306 fit?
- It's listed to fit the Holden WK/WL Statesman V8. Confirm your exact series and engine with the workshop before ordering.
- What size are the extractors and pipework?
- 1-7/8in extractor primaries feeding 3in system pipework, finishing with a hotdog resonator and a rear muffler.
- What's the hotdog for?
- The hotdog is a compact resonator that trims some edge off the note; the rear muffler does the main silencing.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.