Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0327
Holden Commodore VF V8 Sedan Wagon 2.5in With Extractors Muffler
Holden Commodore VF V8 Sedan Wagon 2.5in With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4830.69 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0327
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Built for the VF — the last of the Commodore line — the MPI Automotive MKHN0327 is a 2.5in extractor system with twin mufflers, listed to fit the Holden Commodore VF V8 Sedan and Wagon. The double-muffler layout across two body styles is its signature.
What does the twin-muffler layout do on the VF?
Rather than a single silencer, the MKHN0327 uses a muffler-muffler arrangement — two mufflers in the 2.5in run — for more silencing and a more settled note on the VF's V8. It is listed across the VF Sedan and Wagon, so the pairing of body styles and double muffler is the character of this part. The bore stays at 2.5in from the extractors right through both mufflers.
How do the extractors feed it?
Extractors replace the VF's cast manifolds with tubular runners off each cylinder, a header set per bank on the V8, feeding the 2.5in system behind them. That tube-and-merge layout eases the way the engine breathes out compared with the heavy cast castings, then leads into the twin-muffler run. It is the engine-side change working as part of the whole exhaust.
Will it suit my VF Commodore — Sedan or Wagon?
The MKHN0327 is listed to fit the Holden Commodore VF V8 in Sedan and Wagon; tell us which you run and we will confirm the exact build. Body style changes the rear routing, the 2.5in figure sets the pipe size, and material is not published by the supplier, so construction is confirmed on order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like the MKHN0327 in-house across the Illawarra. The job means dropping the factory manifolds, fresh gaskets, and routing the 2.5in run with both mufflers to suit the Sedan or Wagon floor. Supplied by MPI Automotive at $4,830.69 AUD; send your details and we will confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Why does the MKHN0327 have two mufflers?
- It runs a muffler-muffler layout — two mufflers in the 2.5in run — for more silencing and a more settled note on the VF V8.
- Does it fit the Wagon as well as the Sedan?
- Yes — it is listed to fit the Holden Commodore VF V8 in both Sedan and Wagon form. Confirm your body with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.