Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0330
Holden Commodore VF V8 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler
Holden Commodore VF V8 Sedan Wagon 3in With 1 7/8 in Extractors Hotdog/Muffler (MKHN0330) Fits HOLDEN.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4812.60 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0330
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0330 pairs a 3in exhaust with a single hotdog muffler for the Holden Commodore VF V8 sedan. It's the bigger-bore-but-compact-silencer combination: a 3in run for flow, kept civil through a straight-through hotdog rather than a full chambered box.
What's the 3in-and-hotdog character?
Stepping up to a 3in system gives the VF V8 more flow capacity than the tighter-bore option, useful on a car carrying other breathing work or chasing a freer top-end. The hotdog muffler is the deliberate counterpoint: a compact straight-through silencer that lets the bigger pipe breathe while keeping the note manageable for a daily-driven sedan. It's the middle path, more pipe than the small system, less silencing bulk than the twin-muffler build.
What does this MKHN0330 set cover?
This is a header-back package for the Holden VF V8. Tuned-length extractors replace the factory cast manifolds at the heads, then feed the matched 3in exhaust and its hotdog muffler. Manifolds and original pipework both come out, replaced as one set so the bore, the headers and the silencing are matched rather than mixed.
Will it suit my VF V8 sedan?
It's listed to fit the Holden Commodore VF V8 sedan. An extractor system is specific to the body and driveline, so send your VF build and the workshop confirms the fitment, including how the 3in run routes under your car, before ordering.
How is it fitted at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits MPI extractor packages like the MKHN0330 in-house across the Illawarra. The job means removing the factory manifolds, fitting the primaries, then hanging the 3in run and hotdog muffler and checking clearances. At an RRP of $4,812.60 it's a special-order set, so we confirm fitment and lead time with you before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How does the MKHN0330 differ from the smaller VF system?
- It runs a 3in exhaust for more flow, paired with a compact hotdog muffler that keeps the note civil.
- Will it fit my Holden VF V8 sedan?
- It's listed to fit the Holden Commodore VF V8 sedan. Confirm your exact build with the workshop before ordering.
- Is this the full system or headers only?
- It's a header-back package, extractors plus the matched 3in exhaust and hotdog muffler, supplied as one MKHN0330 set.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.