Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0336
VF HSV Ute Maloo V8 3in With 1 7/8 in Extractors Hotdog/Muffler
VF HSV Ute Maloo V8 3in With 1 7/8 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4812.60 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0336
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0336 is the ute-bodied 3in extractor package for the VF HSV Maloo V8, finished with a single hotdog muffler. This is the one routed for the ute floor and tray rather than a sedan boot; the body shape is what sets it apart in the VF range.
What does the ute body change about the fit?
A Maloo ute routes its exhaust differently to a sedan: the rear section has to clear the tray, chassis rails and rear suspension on a longer, more open underbody. The MKHN0336 is the 3in system laid out for that ute geometry, so the pipework and the hotdog muffler sit where the ute body wants them rather than being a sedan kit forced under a tray.
Why the 3in-and-hotdog combination?
The 3in bore gives the Maloo V8 more flow capacity, while the hotdog muffler, a compact straight-through silencer, keeps the note lifted over stock without the bulk of a full chambered box. On a ute that's often worked as well as driven, it's a practical pairing of flow and a manageable cabin note.
Will it suit my VF Maloo?
It's listed to fit the VF HSV Maloo V8 ute, and the record names both Holden and HSV. Because the system is specific to the ute body and driveline, send your Maloo build and the workshop confirms the fitment, including rear-section clearance, before ordering.
How is it fitted at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits MPI extractor packages like the MKHN0336 in-house across the Illawarra. Header work means pulling the factory manifolds, fitting the primaries, then hanging the 3in ute run and hotdog muffler and checking tray and chassis clearance. At an RRP of $4,812.60 it's a special-order set, so we confirm fitment and lead time before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKHN0336 made for the ute body?
- Yes, it's the 3in system routed for the VF HSV Maloo ute floor and tray, not a sedan kit. We confirm rear-section clearance on your ute.
- Will it fit my Maloo V8?
- It's listed to fit the VF HSV Maloo V8 ute, with the record naming both Holden and HSV. Confirm your exact build with the workshop before ordering.
- What muffler does it use?
- A single hotdog, a compact straight-through silencer that lifts the note over stock without a full chambered box.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.