Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0343
Holden Commodore VF Ute V8 3in With 1 7/8 in Extractors Muffler
Holden Commodore VF Ute V8 3in With 1 7/8 in Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5136.92 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0343
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0343 is the 3in extractor package for the Holden Commodore VF V8 ute, finished with a full muffler. It's the ute-bodied, quieter-silencing build: 3in flow under the tray, with a chambered muffler rather than a straight-through hotdog.
Why the ute layout plus a full muffler?
A VF ute carries its rear exhaust under a tray and over the rear suspension, so the MKHN0343 is laid out for that ute underbody rather than a sedan boot. Pairing the 3in bore with a full chambered muffler is the calmer choice: the muffler does more silencing work than a hotdog, keeping the cabin note in check on a ute that's driven daily, while the 3in run keeps the flow up.
What does the package replace?
This is a header-back overhaul for the Holden VF V8 ute. Tuned-length extractors replace the factory cast manifolds at the heads, then feed the matched 3in exhaust and muffler. The manifolds and original ute pipework come out together and are replaced as one MKHN0343 set, so the headers, bore and silencing are matched as designed.
Will it suit my VF Commodore ute?
It's listed to fit the Holden Commodore VF V8 ute. Because the system is tied to the ute body and driveline, send your VF ute details and the workshop confirms the fitment, including how the 3in rear clears the tray and rear suspension, before ordering.
What's involved fitting it at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits MPI extractor packages like the MKHN0343 in-house across the Illawarra. The job means removing the factory manifolds, fitting the primaries, then hanging the 3in ute run and muffler and checking clearances under the tray. At an RRP of $5,136.92 it's a special-order set, so we confirm fitment and lead time with you before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKHN0343 quieter than the hotdog version?
- Yes, it runs a full chambered muffler, which does more silencing work than a straight-through hotdog on the same 3in ute system.
- Will it fit my Holden VF V8 ute?
- It's listed to fit the Holden Commodore VF V8 ute. Confirm your exact build with the workshop before ordering.
- Is this routed for the ute body?
- Yes, the rear section is laid out to clear the VF ute tray and rear suspension, not a sedan boot.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.