Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0344
Holden Commodore VF Ute V8 3in With 1 7/8 in Extractors Hotdog/Muffler
MPI Automotive Holden Commodore VF Ute V8 3in With 1 7/8 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4889.15 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0344
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Running 1⅞in primary tubing into a 3in system, the MPI Automotive MKHN0344 is the larger-bore extractor package for the VF Commodore V8 ute, finished with a hotdog resonator and a muffler. The 1⅞in primaries are the headline: that size leans toward higher-rpm, higher-output V8 builds.
What does 1⅞in primary tubing suit?
Primary tube size is an application choice. The 1⅞in primaries on the MKHN0344 are the larger of the common extractor sizes — they suit a higher-revving, higher-output V8 where you want maximum flow up top, rather than a mild street tune chasing only low-down response. Paired with 3in pipework behind them, this is the big-bore end of the VF ute extractor range.
Hotdog plus muffler — what does that do?
This package runs a hotdog resonator as well as a muffler. The hotdog is an inline straight-through silencer that takes an edge off the drone before the gas reaches the main muffler, so the two together aim for a cleaner, more liveable note than a single muffler on 3in pipe alone — useful on a ute that doubles as a daily.
How do extractors change a VF ute?
Extractors replace the cast factory manifold with tubular headers, each cylinder getting its own primary before they merge. The honest trade-offs are extra fitting time, more under-bonnet heat and less clearance than the original casting. On the VF ute, the 1⅞in primaries and 3in run are matched as one package so the whole exit is sized together.
Will it fit my VF ute, and who installs it?
It's listed to fit the V8 VF Commodore ute. Oak Flats Muffler Men supplies and fits these systems across the Illawarra — we confirm the 3in routing, the hotdog and muffler positions and the listed fitment against your actual ute before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What primary size are the MKHN0344 extractors?
- 1⅞in primaries, running into a 3in system. That larger size leans toward higher-rpm V8 builds.
- Does it have a resonator as well as a muffler?
- Yes — it runs a hotdog resonator and a muffler, aimed at a cleaner note on the 3in pipe.
- Is it for the VF ute?
- It's listed to fit the V8 VF Commodore ute. Confirm your exact build with the workshop first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.