Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0393SC
Holden Commodore VP VR VS Sedan 5L V8 Auto IRS 2.5in With Extractors Tailpipe
Holden Commodore VP VR VS Sedan 5L V8 Auto IRS 2.5in With Extractors Tailpipe (SKU: MKHN0393SC) Engineered
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2963.47 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0393SC
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0393SC is a 2.5in extractor-and-exhaust package listed to fit the Holden Commodore VP, VR and VS sedan with the 5L auto V8 and IRS. It finishes through a tailpipe, making it a header-back overhaul rather than a tailpipe-only swap.
What does this extractor system cover?
This is a header-back package for the VP-to-VS sedan with the 5L V8, automatic transmission and independent rear suspension. It starts at the cylinder heads with extractors and runs a 2.5in exhaust out to a tailpipe. The factory cast manifolds and original pipework both come out, replaced as one matched MKHN0393SC kit. The IRS-specific routing is why this build is called out separately — the rear suspension layout changes how the pipework is run.
What's an extractor and what does it change?
Extractors are tuned-length headers that replace the cast manifolds the V8 ships with. Each cylinder getting its own primary tube before the merge lowers back-pressure and helps the engine clear spent gas. The honest trade-offs are heat exposure in the bay, a longer fit than a bolt-on muffler, and a changed note. Here the extractors feed a 2.5in run finishing through a tailpipe, sized to suit the older 5L sedan.
Will it suit my VP, VR or VS IRS sedan?
It's listed to fit the Holden Commodore VP, VR and VS sedan with the 5L auto V8 and IRS. Because an extractor system is tied to the body, engine, transmission and the rear suspension type, the exact build matters: send your sedan's details and the workshop will confirm fitment before anything is ordered.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits MPI extractor packages like the MKHN0393SC in-house across the Illawarra. The work means removing the factory manifolds, fitting the extractors, then hanging the 2.5in run to the tailpipe and checking clearances around the IRS. At an RRP of $2,963.47 it's a special-order set, so we confirm fitment and lead time with you before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKHN0393SC fit my IRS Commodore sedan?
- It's listed to fit the Holden Commodore VP, VR and VS sedan with the 5L auto V8 and IRS. Confirm your exact build with the workshop before ordering.
- Why does the IRS matter for this kit?
- The independent rear suspension changes how the rear pipework is routed, which is why this IRS-specific build is listed separately.
- Is this a full system or just the headers?
- It's a header-back package: extractors plus a 2.5in exhaust finishing through a tailpipe, supplied as one matched MKHN0393SC kit.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.