Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0409
Holden Commodore VU VY VZ V8 Ute 3in Dual With 1 3/4 in Extractors Hotdog/Muffler
Holden Commodore VU VY VZ V8 Ute 3in Dual With 1 3/4 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4383.68 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0409
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0409 leads with a hotdog-and-muffler rear, a 3in dual extractor system listed to fit the Holden Commodore VU/VY/VZ V8 Ute. A compact hotdog resonator sits ahead of the rear muffler, lifting the note a touch over a twin-muffler build while the 1¾in primaries handle the heads.
What does the hotdog-and-muffler setup give the ute?
This is the hotdog variant of the VU/VY/VZ ute extractor system. Instead of two full mufflers, it pairs a small hotdog resonator with a single rear muffler. The practical effect is a slightly freer, more present note than a muffler-and-muffler arrangement on the same ute, without going to a straight-through setup. It runs as a 3in dual system off 1¾in primary extractors.
What does a tubular extractor do here?
Extractors replace the cast factory manifolds with tubular runners off each port, easing the merge and reducing restriction at the heads. The 1¾in primaries on the MKHN0409 keep gas speed up for street mid-range on the V8 ute, feeding the 3in dual run. It's sold as a complete engine-back package, so the headers, pipework, hotdog and muffler are matched. We hold no published flow or sound figures, so the case for it is the sizing and the hotdog tuning, not a measured number.
Will it suit my VU, VY or VZ Commodore Ute?
It is listed to fit the Holden Commodore VU/VY/VZ V8 Ute across those three series. Confirm your exact series and any earlier exhaust work with the workshop before ordering, as feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits these ute systems in-house across the Illawarra. We confirm extractor access at the heads, route the 3in dual run, and locate the hotdog and rear muffler under the tray. At an RRP of $4,383.68 it's a build-to-order package; send your ute's details and we'll confirm clearances.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How does the hotdog change the sound versus twin mufflers?
- The hotdog-and-muffler build is generally a touch freer and more present than a muffler-and-muffler setup on the same ute. We have no measured sound data, so it's a relative description only.
- Will the MKHN0409 fit my VY Commodore Ute?
- It's listed to fit the Holden Commodore VU/VY/VZ V8 Ute. Confirm your exact series with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.