Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0417
Holden WK WL Statesman V8 3in Dual With 1 3/4 in Extractors Hotdog/Muffler
MPI Automotive Holden WK WL Statesman V8 3in Dual With 1 3/4 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4700.39 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0417
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Listed for the WK and WL Statesman, the MPI Automotive MKHN0417 is a 3in dual extractor system for the Holden WK/WL Statesman V8, running 1¾in primaries into a hotdog-and-muffler rear. It's the more present build across both long-wheelbase Statesman series.
What does this WK/WL Statesman system cover?
The MKHN0417 is listed for the Holden WK and WL Statesman V8 — the later long-wheelbase luxury Commodore platforms. It's the hotdog-and-muffler build, pairing a compact resonator with a rear muffler for a more present note than a twin-muffler setup, on a 3in dual system off 1¾in primary extractors at the heads.
What's the extractor and hotdog combination doing?
Tubular extractors replace the cast manifolds with runners off each port, easing the merge at the heads. The 1¾in primaries keep gas velocity up for street low- and mid-range on the V8, feeding the 3in dual run into the hotdog and rear muffler. It's a complete engine-back package matched for the long Statesman body. We have no published flow or sound figures, so the description is about the sizing and the hotdog tuning rather than a measured claim.
Will it suit my WK or WL Statesman?
It is listed to fit the Holden WK/WL Statesman V8. Both are long-wheelbase luxury platforms, and this system is routed for that body. Confirm your exact Statesman series and any prior exhaust work with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Statesman extractor systems in-house across the Illawarra. We confirm extractor access at the heads, then route the 3in dual run and locate the hotdog and rear muffler under the long body. At an RRP of $4,700.39 it's a build-to-order item; send your WK or WL details for fitment confirmation.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the MKHN0417 cover both WK and WL?
- Yes — it's listed for the Holden WK/WL Statesman V8. Confirm your exact series with the workshop before ordering.
- What's the rear arrangement?
- A hotdog resonator ahead of a rear muffler, on a 3in dual system off 1¾in primaries.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.