Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0422
Holden Commodore VE V8 Sedan Wagon 3in With 1 3/4 in Extractors Muffler
MPI Automotive Holden Commodore VE V8 Sedan Wagon 3in With 1 3/4 in Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4817.10 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0422
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0422 is the 3in extractor-and-muffler package built for the Holden Commodore VE V8 sedan. It's a VE-specific set, laid out for that generation's engine bay and underbody rather than carried over from another Commodore platform.
Why a VE-specific extractor set?
The VE Commodore is its own platform: the engine bay packaging, steering and floor routing differ from the earlier and later Commodores, so the header geometry and pipe path have to suit the VE specifically. The MKHN0422 is listed for the VE V8 sedan, which is why fitment is tied to that generation rather than the badge alone.
What does the package cover?
It's a header-back overhaul: tuned-length extractors replace the factory cast manifolds at the cylinder heads, then feed a matched 3in exhaust running a full muffler. The cast manifolds and the original VE pipework both come out and are replaced as one MKHN0422 set, so the headers, the 3in bore and the silencing are matched as a system.
What does the muffler finish give you?
A full chambered muffler is the more restrained silencing choice on a 3in system; it lifts the note over the restrictive factory setup while keeping a VE sedan liveable on the road. The 3in bore behind it gives the V8 flow headroom, particularly on a car carrying other breathing work.
Will it suit my VE sedan, and how is it fitted?
It's listed to fit the Holden Commodore VE V8 sedan. Because the system is tied to the VE body and driveline, send your build and the workshop confirms the fitment before ordering. Oak Flats Muffler Men supplies and fits these MPI packages in-house across the Illawarra. At an RRP of $4,817.10 it's a special-order set, so we confirm fitment and lead time before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKHN0422 specific to the VE?
- Yes, it's listed for the Holden Commodore VE V8 sedan, with the header geometry and routing suited to that generation. Confirm your build with the workshop.
- What's the system size and silencing?
- A 3in exhaust with a full muffler, the more restrained finish, giving the V8 flow headroom while staying liveable.
- Is this the full system or headers only?
- It's a header-back package, extractors plus the matched 3in exhaust and muffler, supplied as one MKHN0422 set.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.