Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0425
HSV VE E2 Sedan Wagon 3in With 1 3/4 in Extractors Hotdog/Muffler
HSV VE E2 Sedan Wagon 3in With 1 3/4 in Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4676.00 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0425
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Listed for the E2-spec HSV, the MPI Automotive MKHN0425 is a 3in extractor system for the HSV VE E2 Sedan and Wagon, running 1¾in primaries into a hotdog-and-muffler rear. It's the E-Series 2 HSV build across both body styles, with the more present hotdog arrangement.
What does the VE E2 designation cover?
The MKHN0425 is listed for the HSV VE E2 Sedan and Wagon — the E-Series 2 update of HSV's VE-based range. It's routed for those bodies and uses a hotdog-and-muffler rear, pairing a compact resonator with a single rear muffler for a present note. The system runs at 3in off 1¾in primary extractors at the heads.
What's the extractor and hotdog combination doing?
Tubular extractors replace the cast manifolds with runners off each port, easing the merge at the heads. The 1¾in primaries keep gas speed up for street low- and mid-range, feeding the 3in run into the hotdog and rear muffler. It's a complete engine-back package matched for the E2 HSV. We have no published flow or sound figures, so the case is the sizing and the hotdog tuning rather than a measured claim.
Will it suit my VE E2 HSV Sedan or Wagon?
It is listed to fit the HSV VE E2 Sedan and Wagon. Confirm your exact E2 model and any prior exhaust changes with the workshop before ordering, as feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits HSV VE extractor systems in-house across the Illawarra. We confirm extractor access at the heads, route the 3in run, and locate the hotdog and rear muffler to suit the sedan or wagon. At an RRP of $4,676.00 it's a build-to-order package; send your VE E2 details for fitment confirmation.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does E2 mean on this listing?
- It marks the E-Series 2 HSV on the VE platform. The MKHN0425 is listed for the HSV VE E2 Sedan and Wagon; confirm your exact model with the workshop.
- What's the rear arrangement?
- A hotdog resonator ahead of a rear muffler, on a 3in system off 1¾in primaries.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.