Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0439
VF HSV Ute Maloo V8 3in With 1 3/4 in Extractors Hotdog/Muffler
VF HSV Ute Maloo V8 3in With 1 3/4 in Extractors Hotdog/Muffler (SKU: MKHN0439) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4676.00 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0439
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
Listed for the Maloo, the MPI Automotive MKHN0439 is a 3in extractor system for the VF HSV Ute Maloo V8, running 1¾in primaries into a hotdog-and-muffler rear. It's the HSV ute build in the VF range, routed for the Maloo's tray body rather than a sedan or wagon.
What makes this the VF Maloo build?
The MKHN0439 is listed for the VF HSV Ute Maloo V8 — HSV's last Maloo ute on the VF platform. That ute body shapes the routing, with the tray and rails giving room for the 3in run. It uses 1¾in primary extractors at the heads and finishes through a hotdog resonator and rear muffler, the more present option among the VF Maloo extractor builds.
Why 1¾in primaries on the Maloo?
Tubular extractors replace the cast manifolds with runners off each port. The 1¾in primary size holds gas velocity up for street low- and mid-range response on the V8, then merges into the 3in system. It's a complete engine-back package — headers, pipework, hotdog and muffler matched for the Maloo. We have no published flow or sound figures, so the description is about the sizing and the hotdog tuning rather than a measured claim.
Will it suit my VF HSV Maloo?
It is listed to fit the VF HSV Ute Maloo V8. Confirm your exact Maloo build and any prior driveline or exhaust changes with the workshop before ordering, as feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits HSV ute extractor systems in-house across the Illawarra. We confirm extractor access at the heads, route the 3in run, and locate the hotdog and rear muffler under the Maloo's tray. At an RRP of $4,676.00 it's a build-to-order package; send your VF Maloo details for fitment confirmation.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKHN0439 listed for the HSV Maloo specifically?
- Yes — it's listed for the VF HSV Ute Maloo V8. Confirm your exact Maloo build with the workshop before ordering.
- What's the primary tube size?
- 1¾in primaries, merging into the 3in system through a hotdog and rear muffler.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.