Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0440
Holden Commodore VF Ute V8 3in With 1 3/4 in Extractors Muffler
Holden Commodore VF Ute V8 3in With 1 3/4 in Extractors Muffler/Muffler (SKU: MKHN0440) Engineered.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4893.65 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0440
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0440 is a 3in exhaust with 1 3/4in extractors listed to fit the Holden Commodore VF V8 ute. It runs the extractors into a 3in system with a muffler each side.
What does this system cover?
This is a header-back package for the VF Commodore ute: 1 3/4in primary tubular extractors off each bank feeding a 3in run with a muffler each side. The 1 3/4in figure is the extractor primary tube size, and the main pipe steps out to 3in. Twin mufflers set a controlled note rather than the hotdog-and-muffler pairing in the related listing. Material and tip detail aren't published by the supplier.
What do the extractors and 3in run add?
Extractors replace the cast factory manifolds with 1 3/4in tubular runners so each cylinder's pulse leaves separately before merging. The 3in run then carries the gases rearward through a muffler on each side. On the V8 VF Commodore ute, the MKHN0440 reworks the system from the heads back rather than just the rear of the tray.
Will it suit my VF Commodore ute?
The MKHN0440 is listed to fit the Holden Commodore VF V8 ute. Ute exhaust routing can vary with body and tray details, so confirm your exact build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits header-back ute systems like this in-house across the Illawarra. The work covers header access at both banks, routing the 3in run with twin mufflers under the tray, and clearance checks along the chassis. Send your build and we'll confirm fitment and book the work.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How does the MKHN0440 differ from the hotdog version?
- This one runs a muffler each side, where the MKHN0441 uses a hotdog resonator with a muffler. Both are 3in systems with 1 3/4in extractors for the VF Commodore V8 ute.
- Will it fit my VF ute?
- It's listed to fit the Holden Commodore VF V8 ute. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.