MKSZ0002

Suzuki Jimny SWB 3 Door, 1.5L Petrol, 2 1/2in Full System, With Centre Hotdog & Rear

Suzuki Jimny SWB 3 Door, 1.5L Petrol, 2 1/2in Full System, With Centre Hotdog & Rear Muffler (MKSZ0002).

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $3009.70 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Suzuki Jimny SWB 3 Door, 1.5L Petrol, 2 1/2in Full System, With Centre Hotdog & Rear Muffler product image

Part specs

SKU
MKSZ0002
Supplier
MPI Automotive
Category
Mufflers and resonators
Vehicle fitment
Suzuki
Stock status
In stock at supplier

Built around a compact centre hotdog and a rear muffler, the MPI Automotive MKSZ0002 is a full 2in exhaust system for the Suzuki Jimny SWB 3-door 1.5L petrol. The hotdog is a straight-through resonator that takes the edge off without a full chambered muffler in the middle.

Why a centre hotdog plus rear muffler?

A hotdog is a short, straight-through resonator — it flows more freely than a chambered muffler and tidies up the note rather than heavily silencing it. Pairing it as the centre stage with a conventional rear muffler gives a layered result: the hotdog keeps gas moving through the middle of the car, and the rear muffler does the final quietening at the tailpipe. On the small 1.5L petrol four it's a balanced street setup.

What does a 2in full system cover?

At 2in this is sized to suit the Jimny's stock-displacement 1.5L engine rather than a heavily modified build, with the bore kept sensible for low-down response on a light four. Being a full system, it replaces the run from the front of the exhaust rearward as one piece, so every section and joint is new rather than mating old to new.

Will it suit my Suzuki Jimny?

It's listed to fit the Suzuki Jimny SWB 3-door with the 1.5L petrol engine. Suzuki built the Jimny across more than one generation, so confirm your exact model and year with the workshop — the listing is a match guide, not a confirmed fit on its own.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men supplies and fits this full system in-house in the Illawarra. As a full-length system it's a more involved fit than a tailpipe swap; we check hanger alignment and clearance on the short-wheelbase body and confirm the build before booking you in.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What's the difference between the centre hotdog and the rear muffler?
The hotdog is a straight-through resonator that flows freely and trims the note; the rear muffler is the main quietening stage at the tailpipe.
What size is the MKSZ0002?
It's a 2in system, sized to suit the stock-displacement 1.5L Jimny petrol engine.
Is it a full system?
Yes — it replaces the exhaust as a complete run rather than a cat-back, so all the sections are renewed.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.