Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors
MPI AutomotiveRRP$5467.66MPI Automotive Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors, Cats and Catback with Single.
View partMKTY0115
Toyota Landcruiser FZJ105 2.5in off Extractors Muffler/Tailpipe
MPI Automotive Toyota Landcruiser FZJ105 2.5in off Extractors Muffler/Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $766.34 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKTY0115
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Toyota
- Stock status
- In stock at supplier
The MPI Automotive MKTY0115 is a 2.5in exhaust run off the extractors, listed to fit the Toyota Landcruiser FZJ105. It carries 2.5in pipework from the extractors back through a muffler and out a tailpipe.
What does "off extractors" mean here?
This part is the exhaust system that runs off the extractors — that is, from the extractor collectors rearward — rather than the extractors themselves. On a Landcruiser like the FZJ105, the extractors replace the cast manifolds at the head; this MKTY0115 is the pipework that picks up downstream of them. It runs at 2.5in. We hold no dyno or sound data for this part, so any change is described in terms of flow and note, not a figure.
What does this 2.5in system cover?
This is the 2.5in extractor-back run for the FZJ105 Landcruiser: 2.5in pipework from the extractor collectors, through a muffler, finishing at a tailpipe. The single muffler and tailpipe make it a straightforward street layout. Material isn't published by the supplier, and no engine capacity is listed for this part, so confirm both the pipe specification and your driveline with the workshop if they matter to your build.
Will it suit my FZJ105 Landcruiser?
It's listed to fit the Toyota Landcruiser FZJ105. The FZJ105 is one of several 100-series and earlier Landcruiser chassis codes, so the exact match matters. Feed data can be imperfect, so treat the listing as "listed to fit" rather than guaranteed — confirm your chassis code and build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Landcruiser exhaust systems like this in-house across the Illawarra. The 2.5in pipework is offered up from the extractor collectors, the muffler and tailpipe are positioned, and the whole run is hung and aligned for clearance over the chassis and any 4x4 hardware. It's a special-order part with an RRP of $766.34. Send us your FZJ105 details and we'll confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKTY0115 fit my Toyota Landcruiser FZJ105?
- It's listed to fit the Toyota Landcruiser FZJ105. Confirm your exact chassis code and build with the workshop before ordering, as feed data can vary.
- Does the MKTY0115 include the extractors?
- No — this is the exhaust that runs off the extractors, the 2.5in pipework, muffler and tailpipe from the collectors back, not the extractors themselves.
- What size is the pipework?
- It runs 2.5in pipework through a muffler to a tailpipe.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$5259.39Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View part
Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST
MPI AutomotiveRRP$4936.68Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST WITH CENTRE MUFFLER & REAR TAILPIPE (SKU.
View part
Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors
MPI AutomotiveRRP$4905.97Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors & Cat Back with Single 3¼in S.
View part
Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats
MPI AutomotiveRRP$4870.49MPI Automotive Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats, Centre & Rear Muffler.
View part
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$4582.89Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.