NM1415M1

NM1415M1 Shock Absorber for Toyota Hilux / N90 (travo) Gun226r, GUN227R (all Types)

NM1415M1 Shock Absorber.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM1415M1 Shock Absorber for Toyota Hilux / N90 (travo) Gun226r, GUN227R (all Types) product image

Part specs

heights
[]
positions
['Rear']
shock_types
['nitromax']
vehicle_count
1

The RAW 4x4 NM1415M1 is a shock absorber listed to fit the Toyota Hilux N90 Travo (GUN226R and GUN227R, all types). It's a replacement damper for the current-generation Hilux, the part that restores control when a corner has worn out.

When a damper needs replacing

Shock absorbers wear gradually, so the decline is easy to miss until the N90 Travo Hilux starts floating over crests, feeling busy on corrugations, or taking longer to settle after a bump. The NM1415M1 is the replacement for that corner — it re-establishes the damping the vehicle was set up around, without touching ride height or anything else.

Does the NM1415M1 fit my N90 Hilux?

It's listed to fit the Toyota Hilux N90 Travo across the GUN226R and GUN227R, all types. The correct damper still comes down to the position on the vehicle and your current ride height, so confirm your exact build with us before ordering instead of relying on the model designation.

Damper, not a lift kit

A shock controls movement; it doesn't raise or lower the ute. Ride height is a spring decision, and we can put together a matched setup if a lift is the goal. On its own the NM1415M1 is a control-and-ride part for the listed N90 Travo.

Fitting through our workshop

Oak Flats Muffler Men replaces shocks like the NM1415M1 at our Oak Flats workshop across the Illawarra, checking the bushes and mounting points as the old unit comes out. RAW 4x4 supply this damper for the N90 Travo; pricing is being confirmed, so ask us for the current figure when you book the fit.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the NM1415M1 fit a GUN226R Hilux?
It's listed to fit the Toyota Hilux N90 Travo GUN226R and GUN227R, all types. Confirm your exact build with the workshop before ordering.
Will replacing the shock lift my Hilux?
No — a shock absorber restores damping control and doesn't change ride height. Lift comes from the springs.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.