NM2501-2544

NM2501 2544 Shock Absorber for Toyota Prado 250 Prado 250 GX GXL & Altitude

NM2501 2544 Shock Absorber.8ltr Turbo Diesel) for selected vehicle applications.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM2501 2544 Shock Absorber for Toyota Prado 250 Prado 250 GX GXL & Altitude (2.8ltr Turbo Diesel) product image

Part specs

heights
['0-50mm']
positions
['Front']
shock_types
['nitromax']
vehicle_count
1

The RAW 4x4 NM2501-2544 pairs a Nitro Max shock absorber with the RC-2544 coil spring for the Toyota Prado 250 (GX, GXL and Altitude) 2.8-litre turbo-diesel. The part number signals a damper supplied together with its intended coil rather than a shock on its own.

What does the NM2501-2544 combine?

This is a RAW 4x4 Nitro Max shock absorber matched to the RC-2544 coil spring and supplied as one part number. Because the damper and the spring are paired by the supplier, the corner is set up as a unit on the Prado 250's front end. Exact spring height and damper specs aren't listed in the record, so we verify them against the vehicle rather than assume.

Shock and coil — what each one does

The coil spring carries the corner's load and sets ride height; the shock controls the speed of compression and rebound so the spring doesn't keep bouncing. Buying them matched, as the NM2501-2544 does, means the damper is valved for the coil it ships with — useful on a 2.8-litre turbo-diesel Prado that carries real weight over the front axle.

Does it match my Prado build?

It's listed to fit the Toyota Prado 250 GX, GXL and Altitude with the 2.8-litre turbo-diesel. The record doesn't carry model years, and supplier fitment data can be imperfect, so confirm your variant and whether you need a single corner or a matched set with the workshop first.

How is it fitted in the Illawarra?

Oak Flats Muffler Men carries out 4x4 suspension fitting at our Illawarra workshop. We inspect the current setup, support the vehicle properly, install the matched shock-and-coil and torque to spec. RRP for this RAW 4x4 item is still pending, so get in touch for a current price.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the NM2501-2544 fit a GXL Prado 250?
It's listed to fit the Prado 250 GX, GXL and Altitude with the 2.8-litre turbo-diesel. Confirm your exact trim and build with the workshop.
What's the difference from the NM2501-2580?
This number pairs the Nitro Max shock with the RC-2544 coil; the 2580 pairs it with the RC-2580. The workshop can advise which coil suits your setup.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.