NM273M4

NM273M4 Shock Absorber Nitro for Toyota Prado 150 Series Gjr150, Kdj150, KDJ155 without

RAW 4x4 NM273M4 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM273M4 Shock Absorber Nitro for Toyota Prado 150 Series Gjr150, Kdj150, KDJ155 without Kdss LWB & SWB Wagon product image

Part specs

heights
['50mm']
positions
['Rear']
shock_types
['nitromax']
vehicle_count
4

The RAW 4x4 NM273M4 is a Nitro gas-charged shock absorber listed to fit the Toyota Prado 150 Series (GJR150, KDJ150, KDJ155) without KDSS, in both LWB and SWB wagon. It's a nitrogen-charged damper built to resist fade, and it's the non-KDSS listing.

What the Nitro design brings to the 150 Series

The NM273M4 is part of RAW 4x4's Nitro range — gas-charged with nitrogen so the damper resists the oil foaming that erodes control when it's worked hard over corrugations. A shock's job is to damp the spring and keep the tyre planted; the Nitro charge is about doing that consistently over long, rough roads rather than fading as it heats. On a touring 150 Series that's the difference between settled and bouncy late in the day.

Why the 'without KDSS' note is the key fitment check

KDSS is Toyota's Kinetic Dynamic Suspension System, a hydraulically linked sway-bar setup on some 150 Series Prados. KDSS and non-KDSS vehicles use different suspension hardware, so dampers are listed for one or the other. The NM273M4 is listed for the version WITHOUT KDSS, in both LWB and SWB. Confirm your KDSS status before ordering — the workshop can check if you're unsure.

What's involved fitting it at our Illawarra workshop?

Oak Flats Muffler Men fits 150 Series dampers in-house, serving the Illawarra. We confirm KDSS status, match the Nitro shock to your springs, fit it on the hoist and check travel and clearance through the range. Send your GJR150, KDJ150 or KDJ155 details and we'll confirm the right unit and book the bay.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the NM273M4 a gas shock?
Yes — it's a RAW 4x4 Nitro nitrogen gas-charged shock absorber, designed to resist fade over rough, sustained terrain.
Does it fit a KDSS Prado?
No — it's listed for the 150 Series WITHOUT KDSS (GJR150, KDJ150, KDJ155), LWB and SWB. Confirm your KDSS status with the workshop first.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.