NM325

NM325 Shock Absorber Nitro for Toyota Hilux Rn106, Ln107, Ln108, LN / RN / Yn110, LN111

NM325 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM325 Shock Absorber Nitro for Toyota Hilux Rn106, Ln107, Ln108, LN / RN / Yn110, LN111 UTE / Dual CAB product image

Part specs

heights
['0-50mm']
positions
['Front']
shock_types
['nitromax']
vehicle_count
2

Built for the older RN106/LN107/LN108/YN110/LN111 Hilux dual cab, the RAW 4x4 NM325 is a Nitro-series shock absorber — a replacement damper for one corner of these long-serving Toyota utes.

Where does the NM325 sit on this Hilux?

This generation of Hilux is a leaf-rear, live-axle workhorse, and the damper's job is to keep that axle from chattering once the springs are loaded. The NM325 replaces a tired factory or aftermarket shock at a single mounting point; it doesn't lift the truck or carry weight — that's the spring's role. RAW 4x4 lists it under the Nitro name, which refers to the nitrogen-gas charge in the body, not a tested output figure.

What does the Nitro charge actually mean?

A nitrogen-charged damper keeps the oil under pressure so it's less prone to foaming and fade when the shock is working hard over corrugations — the kind of going these RN/LN Hiluxes still see on stations and tracks. RAW 4x4 hasn't published a length, stroke or valving spec for the NM325 in our record, so we don't quote one. We confirm front-versus-rear and the right quantity against your truck before ordering.

Does it fit my RN/LN Hilux dual cab?

It's listed to fit the Toyota Hilux RN106, LN107, LN108, YN110 and LN111 ute dual cab. With trucks this age, prior repairs and mismatched springs are common, so the listing is a starting point — send us your build and we'll check the NM325 is the correct shock for the corner you're replacing.

Fitting at our Illawarra workshop

Oak Flats Muffler Men fits shock absorbers in-house across the Illawarra. We renew dampers in axle pairs so the truck stays even side to side, check the mounts and bushes while it's apart, and confirm the ride afterwards. Pricing on this line is confirmed on request, as it can be a special-order item.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the NM325 suit my older Hilux dual cab?
It's listed to fit the Toyota Hilux RN106, LN107, LN108, YN110 and LN111 ute dual cab. Confirm the corner and your exact build with the workshop before ordering.
Are any performance numbers published for it?
No. RAW 4x4 lists it as a nitrogen gas-charged Nitro damper with no length, valving or sound figures, so we don't quote any.
Do I need to replace both sides?
We fit dampers in axle pairs so both sides behave the same; we can advise on quantity for your setup.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.