NM498

NM498 Shock Absorber Nitro for Toyota Landcruiser 80 Series Fj80, Hdj80, HZJ80 100MM

NM498 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM498 Shock Absorber Nitro for Toyota Landcruiser 80 Series Fj80, Hdj80, HZJ80 100MM (4”) Lift Wagon (all… product image

Part specs

heights
['0-60mm', '100mm']
positions
['Rear']
shock_types
['nitromax']
vehicle_count
3

Matched to a raised 80, the RAW 4x4 NM498 is a Nitro shock absorber listed to fit the Toyota Landcruiser 80 Series wagon (FJ80, HDJ80, HZJ80) running a 100mm (4in) lift. The extended damper length is what suits the lifted ride height.

What a lift shock has to do

A 100mm (4in) lift extends the 80 Series suspension, so the damper has to control a longer stroke without topping out at droop. The NM498 is RAW 4x4's Nitro shock specified for that lifted setup. The supplier doesn't publish bore, stroke or valving figures here, so we don't state them — the part is defined by its fitment to the lifted 80, not by numbers we can't verify.

Which 80 Series setup?

It's listed to fit the FJ80, HDJ80 and HZJ80 wagon configured with a 100mm (4in) lift, all variants. The lift height in the title distinguishes this damper from the stock-height shock for the same truck. Confirm your real lift, the coils fitted and front-or-rear position with the workshop, since lift builds differ.

Is there a published price?

No RRP is recorded against the NM498 in our data. We'll quote it directly, generally as an axle pair so both sides stay matched.

Fitting at our Illawarra workshop

Oak Flats Muffler Men sets up lifted 80 Series dampers in-house, checking brake-line length, bump-stops and travel on a 4in build so nothing binds. It's listed to fit the lifted 80 Series wagon; send your details and we'll confirm the correct shock and book the bay.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the NM498 for a lifted 80 Series?
Yes — it's listed for the 80 Series wagon with a 100mm (4in) lift. A stock-height 80 takes a different shock.
How is it different from the standard shock?
It's specified for the taller, lifted ride height rather than factory height. Confirm your build with the workshop.
What's the price?
RAW 4x4 hasn't published an RRP in our records. We'll quote it, usually as a pair.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.