NM964-3003

NM964 3003 Shock Absorber Nitro for Toyota Hilux N80 (revo) Gun125r, GUN126R Revo UTE

RAW 4x4 NM964 3003 Shock Absorber Nitro.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
NM964 3003 Shock Absorber Nitro for Toyota Hilux N80 (revo) Gun125r, GUN126R Revo UTE / Dual CAB (all… product image

Part specs

heights
['40mm']
positions
['Front']
shock_types
['nitromax']
vehicle_count
1

Nitrogen-gas damping is what sets the RAW 4x4 NM964-3003 apart: it's a Nitro shock absorber listed to fit the Toyota Hilux N80 Revo (GUN125R and GUN126R ute, dual-cab and all variants). The gas charge is the headline, aimed at more consistent control than a plain hydraulic damper under sustained corrugations.

What does the Nitro gas charge do?

A gas-charged shock runs a nitrogen pressure inside the body that helps keep the damper oil from aerating — foaming — when it's worked hard over repeated hits. The practical upshot on an N80 Revo Hilux is more consistent damping on long dirt-road corrugations and less fade as the shock heats up. The NM964-3003 is RAW 4x4's Nitro damper for this application, so it's the gas-charged option rather than a basic hydraulic replacement.

Which Hilux does it fit?

It's listed to fit the Toyota Hilux N80 Revo across the GUN125R and GUN126R ute platforms, dual-cab and the listed variants. The position on the vehicle and your current ride height determine the correct damper, so confirm your exact build with us before you order — the model code alone doesn't pin down the corner.

Gas shock versus a standard damper — what's the trade-off?

A Nitro gas shock is built for owners who spend time on rough dirt and want the damping to hold up across a long corrugated run, where a plain hydraulic unit can start to fade. For a vehicle that mostly sees bitumen, a standard damper may be all that's needed. We'll talk through how you use the Hilux and steer you to the right one rather than upselling the gas unit by default.

How do we fit it in the Illawarra?

Oak Flats Muffler Men replaces shocks like this in our Oak Flats workshop. We inspect the mounts and bushes as the old damper comes out and torque everything to spec on the way back in. Pricing on the NM964-3003 is being confirmed by the supplier, so ask us for the current figure when you book.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What makes this a Nitro shock?
It's a nitrogen-gas-charged damper. The gas charge helps resist oil aeration and damping fade when the shock is worked hard over rough ground, compared with a plain hydraulic shock.
Does it fit the GUN126R Revo?
Yes — it's listed to fit the Toyota Hilux N80 Revo GUN125R and GUN126R ute, dual-cab and all listed variants. Confirm your build with the workshop first.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.