passenger-side-4-stainless-snorkel-to-suit-toyota-80-series-landcruiser-short-en

Passenger Side 4" Stainless Snorkel to suit Toyota 80 Series Landcruiser Short Entry

Passenger Side 4" Stainless Snorkel to suit Toyota 80 Series Landcruiser Short Entry.

BrandRadius Fabrications

Category: Cold air induction systems

RRP $750.00 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Passenger Side 4" Stainless Snorkel to suit Toyota 80 Series Landcruiser Short Entry product image

Part specs

SKU
passenger-side-4-stainless-snorkel-to-suit-toyota-80-series-landcruiser-short-en
Supplier
Radius Fabrications
Category
Cold air induction systems
Vehicle fitment
Toyota
Stock status
Confirmed on order

A 4in bore on the passenger side defines this one: the PASSENGER-SIDE-4-STAINLESS-SNORKEL-TO-SUIT-TOYOTA-80-SERIES-LANDCRUISER-SHORT-EN is a large-diameter, short-entry 304 stainless snorkel from Radius Fabrications, listed to fit the Toyota 80 Series Landcruiser.

What does a 4in bore suit?

The bore is the differentiator here. At 4in this is a larger-diameter snorkel than a stock-size unit, the kind 80 Series owners fit when they want plenty of intake area on a modified or hard-worked engine. It's a deliberate big-bore pickup rather than a like-for-like replacement, paired here with a short-entry head on the passenger side.

Short entry, passenger side

The short-entry head keeps the pickup lower on the pillar than a roof-height design, and the passenger-side mount decides what it clears on your truck. Together they make this a lower-profile, large-bore setup — a specific combination rather than a generic snorkel, so the routing is part of the spec.

Will it suit my 80 Series?

It's listed to fit the Toyota 80 Series Landcruiser on the passenger side. Given the larger bore, confirm your build and any guard or bar accessories with us so we can check clearance before ordering. Fitment is listed, not guaranteed until we've seen the truck. Radius Fabrications builds it in 304 stainless.

What does fitting involve in the Illawarra?

Oak Flats Muffler Men fits this in-house. A larger-bore snorkel still wants a clean guard cut, a sealed entry and a tidy run into the airbox so nothing bypasses the filter — and on a dusty-touring 80 that seal is the whole point of the exercise. The 304 stainless body from Radius Fabrications gives it a long corrosion life on the coast and the tracks. RRP is $750.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

How big is the bore?
It's a 4in snorkel — a larger-diameter unit suited to modified or hard-worked 80 Series engines rather than a stock-size replacement.
Which side and entry?
Passenger side with a short-entry head, sitting lower on the pillar than a roof-height design.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.