passenger-side-4-stainless-snorkel-to-suit-toyota-80-series-landcruiser-short-en

Passenger Side 4" Stainless Snorkel to suit Toyota 80 Series Landcruiser Short Entry

Radius Fabrications Passenger Side 4" Stainless Snorkel to suit Toyota 80 Series Landcruiser Short Entry.

BrandRadius Fabrications

Category: Cold air induction systems

RRP $750.00 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Passenger Side 4" Stainless Snorkel to suit Toyota 80 Series Landcruiser Short Entry product image

Part specs

SKU
passenger-side-4-stainless-snorkel-to-suit-toyota-80-series-landcruiser-short-en
Supplier
Radius Fabrications
Category
Cold air induction systems
Vehicle fitment
Toyota
Stock status
Confirmed on order

The PASSENGER-SIDE-4-STAINLESS-SNORKEL-TO-SUIT-TOYOTA-80-SERIES-LANDCRUISER-SHORT-EN is a 4in passenger-side short-entry snorkel for the Toyota 80 Series Landcruiser, a 304 stainless unit from Radius Fabrications built around a larger-than-stock intake bore.

Why a 4in snorkel?

Bore is what defines this unit. A 4in tract gives plenty of intake area, the size 80 Series owners reach for on a modified or hard-worked engine where a stock-bore snorkel becomes the restriction. It's a deliberate large-diameter pickup, set up here as a short-entry head on the passenger side.

What the short entry and side decide

The short-entry head sits lower on the pillar than a roof-height design, keeping the profile down, and the passenger-side mount governs what it clears against your guard, bar and accessories. The two together make this a specific routing rather than a one-size snorkel — worth bearing in mind when checking fit.

Will it suit my 80 Series?

It's listed to fit the Toyota 80 Series Landcruiser on the passenger side. Because of the larger bore, send your build and any accessories through so we can confirm clearance before ordering. Fitment is listed, not guaranteed until checked. Radius Fabrications supplies it in 304 stainless.

What does fitting involve in the Illawarra?

Oak Flats Muffler Men fits this in-house. Even a larger-bore snorkel needs a clean guard cut, a sealed entry and a tidy tract into the airbox so nothing bypasses the filter. The short-entry head keeps the run shorter than a full roof-height design, but the seal at the guard is still what decides whether dust stays out on a corrugated road. Radius Fabrications supplies it in 304 stainless, and the RRP is $750.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What bore is it?
A 4in large-diameter snorkel for modified or hard-worked 80 Series engines, on the passenger side with a short-entry head.
Will it clear my accessories?
Send your build through — the passenger-side, short-entry routing means we'll check guard and bar clearance before ordering.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.