PH12660L_R_B

PH 12660 3.4 Litre V6 Prado

PH 12660 3.4 Litre V6 Prado.

BrandPacemaker

Category: Extractors and headers

RRP $965.02 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
PH 12660 3.4 Litre V6 Prado product image

Part specs

SKU
PH12660L_R_B
Supplier
Pacemaker
Category
Extractors and headers
Vehicle fitment
Toyota 95 Series V6 Petrol (VZJ95R)
Stock status
Confirmed on order

The Pacemaker PH12660L_R_B is an extractor set listed to fit the Toyota Prado with the 3.4-litre V6. It's the header pair for that engine, supplied by Pacemaker and listed at $965.02.

What is the PH12660L_R_B?

This is a left-and-right extractor (header) set for the Toyota Prado fitted with the 3.4-litre V6. Extractors replace the cast factory exhaust manifolds with tuned tubing that gives the exhaust a freer path off the cylinder heads. This is the header pair on its own; the rest of the exhaust is a separate item, and the detailed contents are confirmed by the workshop.

What does an extractor set do?

An extractor, or header, takes over from the standard manifold at the head. On a V6 like the Prado's 3.4-litre there's a set for each bank. The cast manifold is compact but restrictive; an extractor uses separated, smoother tubing to reduce back-pressure and help the engine breathe out. The trade-off is more under-bonnet heat and a changed note compared with stock, and the outcome depends on the rest of the exhaust.

Will it suit my Prado?

It's listed to fit the Toyota Prado with the 3.4-litre V6. The Prado was offered with more than one engine, so confirm your vehicle runs the 3.4-litre V6 and check your exact model with the workshop before ordering — extractor fitment is engine-specific.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men supplies and fits extractors like this across the Illawarra. We'll confirm the set suits your 3.4-litre V6 Prado, check gaskets and clearances, and book the install once your vehicle is verified.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What does the PH12660L_R_B fit?
It's listed for the Toyota Prado with the 3.4-litre V6. Confirm your exact model and engine with the workshop.
Is this a full exhaust?
No — it's the left-and-right extractor pair. The rest of the exhaust is separate, which we can confirm with you.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.