Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$6010.22Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Exhaust System with Ceramic Coated Headers and Cats, Quad Tip Rear (Will.
View partPP4182-56
Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Exhaust System
Pacemaker Australia Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Exhaust System with Headers and Cats, Quad Tip Rear (Will.
BrandPacemaker
Category: Extractors and headers
RRP $5228.28 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP4182-56
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Ford 7th Generation
- Stock status
- Confirmed on order
Unlike a headers-only set, the Pacemaker PP4182-56 is a complete 3-inch exhaust system — headers, cats and a quad-tip rear all in one package — listed to fit the 7th-generation Ford Mustang S650 5.0L V8 Coyote from 2023. Because it carries the catalytic converters through, it's a full header-back upgrade rather than a cat-delete.
What does this complete system include?
This is the all-in-one option: factory-replacement headers off the Coyote V8, the catalytic converters retained, a 3-inch pipe run, and a quad-tip rear to suit the S650's rear styling. Where a bare header set leaves you sourcing the rest of the exhaust separately, the PP4182-56 covers the path from the heads to the tips as a single package, which is why it carries the higher RRP of the family.
Does it keep the cats?
Yes — this system is supplied with the catalytic converters, so it isn't a cat-delete. Retaining the cats keeps the emissions hardware the Mustang left the factory with in place, which is the sticking point for road compliance on a V8 like the Coyote. We don't make compliance claims for you; confirm the exact build and any state requirements with the workshop before fitting.
Why a 3-inch system on the S650 Coyote?
A 3-inch bore matches the breathing of the 5.0L Coyote V8 and keeps the path consistent from the headers back, rather than necking down behind the merge. The headers replace the factory cast manifolds with tube runners that scavenge each cylinder more cleanly, and the quad-tip rear finishes the system to the S650's existing four-outlet rear styling. It's listed to fit the 2023-on 7th-generation Mustang.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits complete Pacemaker systems like the PP4182-56 in-house across the Illawarra. It's listed to fit the S650 Mustang 5.0L V8; send us your exact build and we'll confirm clearances and the quad-tip alignment before booking the bay. Pacemaker lists this system at an RRP of $5,228.28.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP4182-56 a cat-delete?
- No. It's supplied with the catalytic converters retained, so the factory emissions hardware stays in place. It's a complete header-back system, not a cat-delete.
- What's in the box compared to a header-only set?
- It's the complete system — headers, cats, a 3-inch run and the quad-tip rear — rather than just the extractors. You're covering the whole path from the heads to the tips in one package.
- Will it fit my S650 Mustang?
- It's listed to fit the 7th-generation Ford Mustang S650 5.0L V8 from 2023. Confirm your exact build with the workshop before ordering, since the listing is a guide rather than a guarantee.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$6010.22Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Exhaust System with Ceramic Coated Headers and Cats, Quad Tip Rear (Will fit RH.
View part
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$5228.28Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Exhaust System with Headers and Cats, Quad Tip Rear (Will fit RH Drive Only).
View part
Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$3398.47Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Ceramic Coated Headers and Cats to suit Factory Exhaust (Will fit RH Drive.
View part
Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch
PacemakerRRP$3398.47Ford Mustang (6th Generation) 2018 to 2023 5.0L V8 Coyote 3” Inch Ceramic Coated Headers and Cats to suit Factory Exhaust (Will fit RH Drive.
View part
Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3”
PacemakerRRP$2616.50Ford Mustang (7th Generation S650) 2023 to Present 5.0L V8 Coyote 3” Inch Headers and Cats to suit Factory Exhaust (Will fit RH Drive Only).
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.