HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5361-31
HSV Maloo Ute V8 - VU and VU II - 1 3/4" Tuned Length Headers and Full 2 1/2 Inch System
HSV Maloo Ute V8 - VU and VU II - 1 3/4" Tuned Length Headers and Full 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4240.03 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-31
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vu Vx
- Stock status
- Confirmed on order
The Pacemaker PP5361-31 pairs 1 3/4in tuned-length headers with a full 2 1/2in system for the HSV Maloo Ute V8 (VU and VU II). It's the complete extractor-and-pipework package rather than a tailpipe-only change.
What does this headers package cover?
The PP5361-31 combines 1 3/4in tuned-length extractors with a full 2 1/2in system for the HSV Maloo Ute V8 in VU and VU II form. The primaries are 1 3/4in and the system carried behind them runs at 2 1/2in end to end. This is the full package as listed, covering the extractors and the pipework rather than just the rear section. We publish no power, flow or sound figures and won't quote any.
What are tuned-length headers and what do they change?
Tuned-length headers replace the cast factory manifolds with separate primary tubes cut to a deliberate length before they merge into a collector. The length is chosen to order the exhaust pulses leaving each cylinder rather than just venting them through one casting. On the Maloo V8 the aim is a cleaner path off the heads, carried through the full 2 1/2in system, with a fuller note as a by-product.
Will it suit my HSV Maloo VU or VU II Ute?
It's listed to fit the HSV Maloo Ute V8 in VU and VU II form. The ute tray, the V8 driveline and the full-system layout dictate the fit, so confirm your exact Maloo build with the workshop before ordering. We check the listing against your vehicle first.
Is it road legal?
This package puts tuned headers ahead of the catalytic converter, so fitting it can affect emissions compliance. No road-compliance approval is published by Pacemaker and we won't claim one. Whether it suits a registered Maloo in NSW depends on the full system and state requirements, which Oak Flats Muffler Men in the Illawarra will work through with you before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-31 a full system?
- Yes — it's 1 3/4in tuned-length headers with a full 2 1/2in system, not a rear-section-only change. Confirm your build with the workshop before ordering.
- Which Maloo is it listed for?
- The HSV Maloo Ute V8 in VU and VU II form. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.