HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5361-33
HSV Maloo Ute V8 - VY and VY II - 1 3/4" Tuned Length Headers and Full 2 1/2 Inch System
HSV Maloo Ute V8 - VY and VY II - 1 3/4" Tuned Length Headers and Full 2 1/2 Inch System With Rear Pipe Only Option (SKU: PP5361-33), $4375.30.
BrandPacemaker
Category: Extractors and headers
RRP $4375.30 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-33
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vy
- Stock status
- Confirmed on order
For the later VY and VY II HSV Maloo V8 ute, Pacemaker PP5361-33 brings 1¾in tuned-length headers and a full 2½in system, with a rear-pipe-only option alongside. The VY-generation Maloo fitment — and that supply split — is what separates this part number from its VU-era sibling.
VY and VY II Maloo: what's matched here?
PP5361-33 is cut to the VY-platform Maloo V8 ute, so the header flanges and routing suit that generation's engine bay and chassis. It's the complete 2½in engine-back system, or — via the rear-pipe-only option — just the back section in 2½in for a ute that already has its front pipework done.
Full system or rear pipe only?
The listing supports two ways in: the whole 2½in system off the 1¾in headers, or the rear pipework only. We work out which your VY/VY II Maloo needs based on what's already fitted, so you order the right portion rather than doubling up on pipe you already have.
Why 1¾in tuned-length primaries?
Tuned-length headers swap the restrictive cast manifolds for equal mandrel-bent runners into a measured collector. The 1¾in primary is the broad street-V8 bore — strong scavenging without trading away the low and mid-range torque a Maloo uses day to day. The 2½in system behind it keeps that velocity through the rev range a road ute lives in.
Road legality and fitting at our Illawarra workshop
This is header-and-pipe hardware, not a certified emissions device, so road registration depends on the complete build and NSW sign-off — we work through that per vehicle. Oak Flats Muffler Men fits these HSV systems in-house across the Illawarra. Listed RRP is 4,375.30 AUD, with the fitting charge quoted once your Maloo is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5361-33 fit the VY Maloo?
- Yes — it's listed for the HSV Maloo V8 ute in VY and VY II form, with a rear-pipe-only option as well as the full 2½in system.
- What's the difference between the full and rear-pipe options?
- The full option is the complete 2½in system off the headers; the rear-pipe-only option is just the back section, for a Maloo whose front pipework is already sorted.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.