HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5361-34
HSV VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System With Rear Pipe Only
HSV VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4115.01 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-34
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vz
- Stock status
- Confirmed on order
Pacemaker PP5361-34 is the rear-pipe-only configuration of the 2½in system for the HSV VZ 6.0-litre V8 ute, run off 1¾in tuned-length headers. The rear-pipe-only build is the point of difference — it's the back section, for a 6.0 HSV ute whose front end is already handled.
Who is the rear-pipe-only build for?
This is the rear pipework in 2½in rather than a full engine-back system. It suits an HSV VZ 6.0 ute that already has its headers and front pipe in place and needs the back half matched. We confirm what's currently under your ute before ordering so the rear section mates correctly to the existing front.
What the 1¾in tuned-length headers do
The listing pairs the rear pipe with 1¾in tuned-length headers — equal mandrel-bent primaries that replace the factory cast manifolds and merge in a measured collector. On the 6.0-litre VZ ute the 1¾in bore keeps gas speed up for the low and mid-range torque a working ute relies on, rather than oversizing for a top-end-only build.
Will it suit my HSV VZ ute?
It's listed to fit the HSV VZ 6.0-litre V8 ute. With no individual build year published against the listing, we treat fitment as listed-to-fit and verify it on your ute — engine, transmission and the front pipework it has to join — before anything is ordered.
Is it road legal, and what's the fit?
Pipework and headers aren't a certified catalytic converter or muffler, so whether the finished ute meets NSW requirements depends on the complete system and its sign-off — a per-build matter. Oak Flats Muffler Men fits these HSV systems across the Illawarra. Listed RRP is 4,115.01 AUD; the fitting charge is quoted with the ute in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-34 a full system?
- No — it's the rear-pipe-only 2½in configuration for the HSV VZ 6.0 ute, run off 1¾in tuned-length headers. We confirm your front pipework matches before ordering.
- Which engine is it for?
- The 6.0-litre HSV VZ V8 ute. Send your exact build and we'll confirm the fitment.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.