HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers
PacemakerRRP$5060.93HSV VE (E Series) E2 Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Headers 3" Sedan Only System (SKU: PP5381-63), $5060.93 from Pacemaker. Engineered
View partPP5361-35
HSV VY Series 2 - VZ 5.7 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System
HSV VY Series 2 - VZ 5.7 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4339.16 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-35
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Hsv Vy Vz
- Stock status
- Confirmed on order
The Pacemaker PP5361-35 is a set of 1¾in tuned-length headers and matched system listed for the HSV VY Series 2 / VZ V8 ute. It's the ute-bodied build in this Pacemaker line, routed for the tray and ute chassis rather than a sedan.
What does the ute body mean for fitment?
A VY to VZ ute carries its rear pipework under a tray and over the ute's rear suspension, a different underbody to the sedan or wagon. The PP5361-35 is the version laid out for that ute geometry, so the headers and pipework follow where the ute body allows. That ute-specific routing is why it's listed separately from the sedan systems.
What do 1¾in tuned-length headers do?
Tuned-length headers replace the restrictive cast manifolds the V8 left the factory with, giving each cylinder its own primary tube before they merge. The 1¾in primary is the street-V8 bore that scavenges spent gas cleanly without bleeding low-down response, so it suits a ute driven on the road rather than a dedicated high-rpm build. The trade-off is honest: headers sit in the engine-bay heat zone and take longer to fit than a bolt-on muffler.
Will it suit my HSV ute?
It's listed to fit the HSV VY Series 2 / VZ V8 ute. With no individual build year published, we treat fitment as listed-to-fit and confirm it on your ute, series, engine and existing exhaust, before anything is ordered, since these models ran several builds.
Is it road legal, and how is it fitted?
These are headers and pipework, not a certified emissions device, so whether the finished ute meets NSW requirements depends on the complete system and its sign-off, a per-build conversation. Oak Flats Muffler Men supplies and fits these Pacemaker systems in-house across the Illawarra. Listed RRP is 4,339.16 AUD; the fitting charge is quoted once the ute is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-35 for the ute body?
- Yes, it's the HSV VY Series 2 / VZ V8 ute version, routed for the tray and ute chassis rather than a sedan.
- What primary size are the headers?
- 1¾in tuned-length primaries, the street-V8 bore that scavenges cleanly without bleeding low-down response.
- Will it fit my HSV ute?
- It's listed to fit the HSV VY Series 2 / VZ V8 ute. Confirm your exact series and build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$5060.93HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Headers 3" Sedan Only System.
View part
HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch
PacemakerRRP$4944.11HSV E2 VE 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Tri-Y Headers 3" Inch System.
View part
HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4891.13Pacemaker HSV VE (E Series) E1 From Sep 2006 - Aug 2009 LS2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1
PacemakerRRP$4890.77Pacemaker HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 3/4" 4 into 1 Header 2 1/2" Sedan Only System.
View part
HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1
PacemakerRRP$4890.77HSV VE (E Series) E2 From Sep 2009 - Aug 2010 LS2 V8 1 7/8" 4 into 1 Competition Headers 2 1/2" Sedan System (PP5382-03) at $4890.77 RRP.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.